Graphics card help

[IREFUSE]

Okay so bought a GTX 770 card
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130921

and was puting it in my motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157293

but it wasn't fitting into the PCI sloth because of the two pices of metal at the end where the DVI and HDMI ports are. If i tried to take off the metal parts would that void the warranty or affect the card. is there other way to slove this ?

Not sure if this helps but heres my built http://pcpartpicker.com/parts/partlist/

 

[McWelshie]

what kind of case are you using ? is i the case thats causing the problem or is it the motherboard blocking it ?

 

[IREFUSE]

A Cooler Master HAF 932 Advanced ATX Full Tower Case

 

[IREFUSE]

I think its the motherboared blocking it because it keeps hiting the motherbord

 

[McWelshie]

any chance of a photo trying to install the motherboard because i dont quite understand how its getting stuck, and i wouldent recommend removing the metal bracket as it supports your gpu keeping it from falling

 

[IREFUSE]

alright give me a sec

 

[Dblkk]

Yes, it should fit, mobo shouldn't be in the way. Don't remove anything. Please post pic, and are you sure your using the right slot then?

 

[IREFUSE]

Heres a link http://postimg.org/image/skk0ehjbh/

 

[IREFUSE]

Heres another not sure if it will help

 

[IREFUSE]

http://postimg.org/image/51qlc92g9/

 

[McWelshie]

is it the two metal prongs at the bottom ? if so you need to slot them in to the tiny gap between metal. that will act like a track and should slide down easily into postion

 

[IREFUSE]

Alright thanks