Status
Not open for further replies.

benstark

Distinguished
Aug 8, 2011
35
0
18,530
Hey guys
I'm fairly new to this and was wondering if anyone has the corsair h100 CPU cooler paired with the coolermaster HaF X and if so, could you fit it internally and how easy was it to mount (does it only just fit or is there heaps of room to spare)?
Much appreaciated
 
Solution
With the radiator that big the only place you could put it is inside top of the case.

---....-....---(inside top of case)
! radiator !
!
!
!
!
!
!
!
!-------------!

I hope my bad picture helps! Or you could just get the H80 and put the radiator on top back of the case.
With that case you would have to remove the top 200mm fan to put the H100 radiator and who knows if the screw holes will line up.

Personally it looks like that case has plenty of cooling. I would just go with the H80 or maybe contact Corsair and see if they have a recommendation.

thee_prisoner

Distinguished
Jun 30, 2008
1,136
0
19,660
I use an Astek cooler which makes the coolers for Corsair. Internally no problem
fitting that into that case. I'm guessing with the H100 instead to the H80 you will
be putting the radiator inside on the top of the case.

Edit. One thing to add to my statement, since the PSU is going on the bottom of the case, make sure you elevate the case
above the floor about an inch. Especially if it is on carpet. I have had to replace two of my friends PSUs( one Fortron, one Corsair) that burnt out because they overheated.

I'm a fan of Fortron PSUs and was impressed the thing last 2 1/2 years basically pushing hot air into a thick carpet!

Happy Cooling, the Prisoner.
 

thee_prisoner

Distinguished
Jun 30, 2008
1,136
0
19,660
With the radiator that big the only place you could put it is inside top of the case.

---....-....---(inside top of case)
! radiator !
!
!
!
!
!
!
!
!-------------!

I hope my bad picture helps! Or you could just get the H80 and put the radiator on top back of the case.
With that case you would have to remove the top 200mm fan to put the H100 radiator and who knows if the screw holes will line up.

Personally it looks like that case has plenty of cooling. I would just go with the H80 or maybe contact Corsair and see if they have a recommendation.
 
Solution

Ninja Pants

Distinguished
Jul 10, 2011
303
0
18,860
It will fit, you can install it on the two cross bars under the 200mm fans (or whatever you have there instead). So to expand on thee_prisoner's diagram:

---....-....---
! 200mm fans
-------------
! radiator
! radiator fans
!
!
!___________!
 
Status
Not open for further replies.