First off, I've seen and searched/read through many similar topics, didn't see this one addressed..
Pics first
First Card
Second Card
Ok, So I can't get them to crossfire, whatsoever. A few bits of info first, A) I've read if, under "Name" at the top, it shows 4870 x2 then that's sufficient, they won't say crossfire, and crossfirex won't be an option in CCC. Mine does not, they both clearly read "ATI Radeon HD 4800 Series." And at the bottom, ATI CrossFire shows "Disabled" sad panda. Also I have tweaked the GPU and Memory Clock speeds very minorly, to show you guys that it registers 2 different cards, and from CCC I can tweak the clock settings on both cards. So they both enabled, work, and everything except crossfire.
Now, in CCC 11.11 Crossfire settings should be under the "Performance" tab on the left. Under that tab I have "AMD Overdrive" and not a thing else.
For Info on my setup, I do have two monitors, currently 1 display running to each card, no idea if that would have a bearing on this or not, going to try that in just 1, BUT I have noticed that if I disable the display to the second monitor, my system drops to thinking it only has 1 card, so maybe, that's why I'm going to check that out also. My educated guess will be that even with both displays running off the one card, I will still get the Primary adapter and Disabled adapter showing, so that's why I'm posting first, any thoughts? Questions?
Thank you for your time, it is appreciated
Pics first
First Card
Second Card
Ok, So I can't get them to crossfire, whatsoever. A few bits of info first, A) I've read if, under "Name" at the top, it shows 4870 x2 then that's sufficient, they won't say crossfire, and crossfirex won't be an option in CCC. Mine does not, they both clearly read "ATI Radeon HD 4800 Series." And at the bottom, ATI CrossFire shows "Disabled" sad panda. Also I have tweaked the GPU and Memory Clock speeds very minorly, to show you guys that it registers 2 different cards, and from CCC I can tweak the clock settings on both cards. So they both enabled, work, and everything except crossfire.
Now, in CCC 11.11 Crossfire settings should be under the "Performance" tab on the left. Under that tab I have "AMD Overdrive" and not a thing else.
For Info on my setup, I do have two monitors, currently 1 display running to each card, no idea if that would have a bearing on this or not, going to try that in just 1, BUT I have noticed that if I disable the display to the second monitor, my system drops to thinking it only has 1 card, so maybe, that's why I'm going to check that out also. My educated guess will be that even with both displays running off the one card, I will still get the Primary adapter and Disabled adapter showing, so that's why I'm posting first, any thoughts? Questions?
Thank you for your time, it is appreciated