Help Can't See Network!

[Audio_Junkie]

Hello everyone please help. Im currently using a Wireless N Networking card
Here is a link to the exact card <http://www.monoprice.com/products/product.asp?c_id=105&cp_id=10501&cs_id=1050103&p_id=5338&seq=1&format=3#specification>

When i install card it only detects non-Secured networks.
It will not detect my secured network or anyone elses. PLEASe help??
Using NetGear Router Supports B\G\N Networks

Running windows 7 64bit
4 Gigs Dual Channel
800Watt Power Supply
Amd Athlon 64bit X2 4000+
9600Gt 1gig SLI Mode (X2)
not sure if that matters but if you need to know

 

[Guest]

Have you tried turning off wireless security in the router temporarily and see if it can be detected and connected to by the N card ?

 

[Audio_Junkie]

yes i turned off all the security and my card will detect and connect to it.
when i turn it back on it cant
Any help? i dont want a wireless n unsecured

 

[Guest]

Check that you are setting the router (and the wireless adapter) to WPA PSK TKIP which is the most widely supported system.

Check the wireless mode in the router -- I'd go for mixed mode, but experiment.

 

[ashleyR]

What OS are you using ? If XP , find your wireless card in Network connections , right click and select " properties " then click on the centre tab ( wireless networks ) then on the " advanced " tab , make sure that connect to non preferred networks isn't ticked and that " connect to Access point ( infrastructure mode ) is selected.

Change the wireless security to WPA2 for the best results with 802.11n hardware .

Ashley