Help Needed Installing Hard Drive into 7XRVP

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Hi all,

I know enough about motherboards and hardware to get myself into
trouble, so I thought I would ask first. I think that one of my two HDs is
dying, and I want to install another as a backup. I installed a DVD+RW into
this system myself, so I'm somewhat familiar with the process.

I have a 7VRXP Rev. 1.1. It has two 80GB HD in Raid 0. My IDE channels
are as follows:

IDE 1: CD-RW (Primary Master)
DVD-ROM (Primary Slave)

IDE 2: DVD+RW (Secondary Master)
OPEN (Secondary Slave)

IDE 3: 80GB HD (Raid 0)

IDE 4: 80GB HD (Raid 0)

I plan on buying a large (80-160 GB) HD with 8MB cache, 7200rpm, ATA
133. My questions are as follows:

1) Should I connect the new HD to IDE 2 as Secondary Slave? or
2) Can I connect it to one of the space connectors on the IDE 3 or 4 cable
(as the slave, I guess), or would this mess up my RAID setup?
3) The manual says I should connect the first HD to IDE 1, but since I have
a RAID setup and this will not be my main (boot) drive, I don't know if this
matters.
4) When I do install it, do I need to make and changes to the BIOS, or will
it detect and setup the new drive on it's own.
5) Any other tips or things I should know before proceeding?

I know this seems like a lot of questions, I'm just looking for answers
so I don't screw up the system I'm trying to salvage.

Thanks All

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

One footnote... the drive I plan to buy is ATA 100 - not ATA 133 (Seagate
80GB) $49.99 after rebate this week at Best Buy.



"Double-T" <not@home.com> wrote in message
news:Yz8lc.538940$Po1.246352@twister.tampabay.rr.com...
> Hi all,
>
> I know enough about motherboards and hardware to get myself into
> trouble, so I thought I would ask first. I think that one of my two HDs
is
> dying, and I want to install another as a backup. I installed a DVD+RW
into
> this system myself, so I'm somewhat familiar with the process.
>
> I have a 7VRXP Rev. 1.1. It has two 80GB HD in Raid 0. My IDE
channels
> are as follows:
>
> IDE 1: CD-RW (Primary Master)
> DVD-ROM (Primary Slave)
>
> IDE 2: DVD+RW (Secondary Master)
> OPEN (Secondary Slave)
>
> IDE 3: 80GB HD (Raid 0)
>
> IDE 4: 80GB HD (Raid 0)
>
> I plan on buying a large (80-160 GB) HD with 8MB cache, 7200rpm, ATA
> 133. My questions are as follows:
>
> 1) Should I connect the new HD to IDE 2 as Secondary Slave? or
> 2) Can I connect it to one of the space connectors on the IDE 3 or 4 cable
> (as the slave, I guess), or would this mess up my RAID setup?
> 3) The manual says I should connect the first HD to IDE 1, but since I
have
> a RAID setup and this will not be my main (boot) drive, I don't know if
this
> matters.
> 4) When I do install it, do I need to make and changes to the BIOS, or
will
> it detect and setup the new drive on it's own.
> 5) Any other tips or things I should know before proceeding?
>
> I know this seems like a lot of questions, I'm just looking for
answers
> so I don't screw up the system I'm trying to salvage.
>
> Thanks All
>
>
>
>