im finishing my first ryzen build an need some advice
my setup is the b450 aorus m + ryzen 5 2600 with 32gb of Crucial Ballistix 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory 2nd set yet to be installed
but after boot up i cant seem to change the setting in bios when i click on auto to go manual it dosent do anything ,i recently saw a youtube where somone showed that clicking on the desired values to change an just type them in an hit enter, can you advise an confirm this iv yet to try
an if it does work whats the best oc clock an voltage to push to 3.7ghz
im using
a ARCTIC Liquid Freezer II 120
an Innovation Cooling Graphite Thermal Pad – Alternative to Thermal Paste/Grease (40 X 40mm
an a Noctua NF-F12 iPPC 3000 PWM in the pull config with two Noctua NF-A14 iPPC-3000 PWM as top exhast to my corsair 275R Airflow case
but i cant seem to change the setting in bios clicking on auto to go manual dont do anything ,i recently saw a youtube where somone showed that clicking on the desired values to change an just type them in can you advise an confirm this iv yet to try
an if it does work whats the best oc clock an voltage to push to 3.7ghz
im using
a ARCTIC Liquid Freezer II 120
an Innovation Cooling Graphite Thermal Pad – Alternative to Thermal Paste/Grease (40 X 40mm
an a Noctua NF-F12 iPPC 3000 PWM in the pull config with two Noctua NF-A14 iPPC-3000 PWM as top exhast to my corsair 275R Airflow case
an to any who can advise me on further bios setting that im using ,should be using or not or havent used that i should be please forgive the not spartin screen shots
https://photos.google.com/share/AF1...?key=NmFFY25QbWVxRmlkaUxuYWwtblVPMHJZVmJyaER3
my setup is the b450 aorus m + ryzen 5 2600 with 32gb of Crucial Ballistix 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory 2nd set yet to be installed
but after boot up i cant seem to change the setting in bios when i click on auto to go manual it dosent do anything ,i recently saw a youtube where somone showed that clicking on the desired values to change an just type them in an hit enter, can you advise an confirm this iv yet to try
an if it does work whats the best oc clock an voltage to push to 3.7ghz
im using
a ARCTIC Liquid Freezer II 120
an Innovation Cooling Graphite Thermal Pad – Alternative to Thermal Paste/Grease (40 X 40mm
an a Noctua NF-F12 iPPC 3000 PWM in the pull config with two Noctua NF-A14 iPPC-3000 PWM as top exhast to my corsair 275R Airflow case
but i cant seem to change the setting in bios clicking on auto to go manual dont do anything ,i recently saw a youtube where somone showed that clicking on the desired values to change an just type them in can you advise an confirm this iv yet to try
an if it does work whats the best oc clock an voltage to push to 3.7ghz
im using
a ARCTIC Liquid Freezer II 120
an Innovation Cooling Graphite Thermal Pad – Alternative to Thermal Paste/Grease (40 X 40mm
an a Noctua NF-F12 iPPC 3000 PWM in the pull config with two Noctua NF-A14 iPPC-3000 PWM as top exhast to my corsair 275R Airflow case
an to any who can advise me on further bios setting that im using ,should be using or not or havent used that i should be please forgive the not spartin screen shots
https://photos.google.com/share/AF1...?key=NmFFY25QbWVxRmlkaUxuYWwtblVPMHJZVmJyaER3
Last edited: