[SOLVED] How do i know if a gpu case hole will line up or not ?

[LowEndPC1234]

I Want to buy a PC casing (Just replacing PC Casing), But i don't know if the GPU Case hole will fit or not. Anyone know how to see if the GPU Case hole will line up or not ?

 

[USAFRet]

I Want to buy a PC casing (Just replacing PC Casing), But i don't know if the GPU Case hole will fit or not. Anyone know how to see if the GPU Case hole will line up or not ?

This is why the ATX standard exists.
Case, motherboard, GPU...all sized and spaced to certain dimensions.

 

[geofelt]

Since all motherboards will have a x16 graphics slot that is standard, you are ok.
The openings are an ATX standard.

If your graphics card is unusual, say with a 3 slot width, then, there might be an issue with a ITX.
motherboard.

What is the make/model of your current case and the prospective replacement?

 

[LowEndPC1234]

my motherboard is micro atx

 

[bignastyid]

my motherboard is micro atx

Which is part of the ATX standard.

 

[LowEndPC1234]

Which is part of the ATX standard.

Will those ATX cases line up with my micro ATX motherboard ?

 

[USAFRet]

Will those ATX cases line up with my micro ATX motherboard ?

Yes. That is why ATX was standardized.

 

[LowEndPC1234]

Will ASUS P5G41TM-LX line up with this case ?

 

[geofelt]

Looks like it will.
To be certain, do a test fit with your motherboard.

That said, the pictured case looks like an old one with poor airflow.
I would not buy it.
You would be better off just having your parts open on a desk.

 

[LowEndPC1234]

there's also case that have very similar size to my PC casing that i'm using right now, it will fit, right ?

 

[hang-the-9]

there's also case that have very similar size to my PC casing that i'm using right now, it will fit, right ?

As stated before, if you have a standard PC case it will fit the standard motherboard of the size the case was made for, and most smaller ones. So full ATX will fit smaller ATX cases (as long as it's not a custom case from an OEM vendor where they did not drill the holes for the stand-offs in the case).