so i have a r5 3500, 3.6Ghz base, 4.1Ghz boost (1.4v reported), 4.0Ghz allcore boost (1.31v reported)
2400-ish multi R20, 450-ish single R20
other specs:
B450-A PRO MAX
G.Skill SniperX 2x8GB 3600Mhz C19
so now im doing a litlle manual overclocking on the BIOS,
4.5Ghz allcore 1.3v, stable P95 (smallest FFT)
get me a ~2900 multi R20 (5x run), and ~510 single R20 (2x run)
what i want to ask, how to make the voltage fluctuate at how much usage it needs
since this override voltage stays at 1.3v at any load [i have a little knowledge about ryzen oc-ing]
example: i want low usage (10%) just using 0.5-0.7v, full load (100%) use 1.3v
my previous build are i5 4670k 4.5Ghz 1.25v
that multiplier stays 45x while the voltage fluctuate but maxed out 1.25v (c3 state enabled)
can i do this with ryzen?
2400-ish multi R20, 450-ish single R20
other specs:
B450-A PRO MAX
G.Skill SniperX 2x8GB 3600Mhz C19
so now im doing a litlle manual overclocking on the BIOS,
4.5Ghz allcore 1.3v, stable P95 (smallest FFT)
get me a ~2900 multi R20 (5x run), and ~510 single R20 (2x run)
what i want to ask, how to make the voltage fluctuate at how much usage it needs
since this override voltage stays at 1.3v at any load [i have a little knowledge about ryzen oc-ing]
example: i want low usage (10%) just using 0.5-0.7v, full load (100%) use 1.3v
my previous build are i5 4670k 4.5Ghz 1.25v
that multiplier stays 45x while the voltage fluctuate but maxed out 1.25v (c3 state enabled)
can i do this with ryzen?