andrewbadlose

Distinguished
Jul 15, 2001
137
0
18,680
I was woondering what kind oif wattage i would need for this sys to run perfectly stable as i have a good 400watt that limits me to one hd...
System...
AXP 2400-->2800+
Chaintech nforce 2
512 ddr 400
geforce 4 4200 128mb
1 X DVD
1 X burner
2 X 5400 rpm hard drives raided
1 X 7200 Hard drive
6 X case fans
1 X 1394 hard drive powered by the buss

<A HREF="http://www.geocities.com/andrewwgoodwin/index.htm" target="_new">Computer Specs Updated</A>..<A HREF="http://service.madonion.com/compare?2k1=4899328" target="_new">3d mark 2k1 1249points</A>
 

Civilized

Distinguished
Sep 4, 2001
753
0
18,980
you could get by with as little as an 350W enermax 365AX-VE (FMA) which would give you plenty of power on all of your voltage rails and would easily outperform higher wattage generic crap. But if you want a 433watter the 465AX-VE (FMA) is my suggestion
 

lhgpoobaa

Illustrious
Dec 31, 2007
14,462
1
40,780
An Enermax, Antec or Toptower PSu of 300W bare minimum. 350W or greter prefered.

<b>My Computer is so powerful Sauron Desires it and mortal men Covet it, <i>My Precioussssssss</i></b>
 

dhlucke

Polypheme
You might want to consider a better case if you need 6 fans to keep that cool.

If you want to see some estimates of what components pull, go check out pcpowerandcooling.com under their powersupply section. Shoot for using 70% of the juice provided for maximum stability.

My advice....350W or better. If you have a 400W, use it.

<font color=red>
<A HREF="http://kevan.org/brain.cgi?dhlucke" target="_new">Introducing the NVIDIA GeForceFX: The first Videocard designed exclusively for deaf people!</A></font color=red>
 

andrewbadlose

Distinguished
Jul 15, 2001
137
0
18,680
A freind Gave me his old enermax 350watt it had slightly better specs thna my generic 400... the onloy one that runs alittle low now is the 5v... line
voltages
vcore1.65--->1.62
+3.3-->3.4
+5--->4.9
12v-->12.5

<A HREF="http://www.geocities.com/andrewwgoodwin/index.htm" target="_new">Computer Specs Updated</A>..<A HREF="http://service.madonion.com/compare?2k1=4899328" target="_new">3d mark 2k1 1249points</A>
 

svol

Champion
That +5V line voltage is within spec... it is normal if they are within 5% range.

My dual-PSU PC is so powerfull that the neighbourhood dimms when I turn it on :eek: