[SOLVED] Hp z620 psu

[Eliashenley]

I have a psu from a z620 and it seems to be modular was wondering if you could use it for a separate build as the motherboard for it doesn't work

 

[delaro]

The physical shape is rather odd and won't mount into a standard PC case.

"HP Z620 Workstation 623194-002 800w Power Supply"

 

[Phillip Corcoran]

I believe also that it has only 3 mounting holes, whereas ATX cases & ATX PSUs have 4

 

[delaro]

I believe also that it has only 3 mounting holes, whereas ATX cases & ATX PSUs have 4

3 mounting holes in the entirely the wrong place and a handle on the side, the intake fan is also in the rear which makes it taller than a traditional supply as well as being longer.

Notice that the wiring is modular but proprietary.

 

[Eliashenley]

Yeah but just wondering if it would work to power up a motherboard

 

[Eliashenley]

I don't really want to throw it away

 

[Eliashenley]

And maybe do some modifying on the case

 

[delaro]

So here will be your problem.

This is the current wiring for an ATX power supply.

1- 24 Pin connector a
1- 4 pin CPU connector

This is what you have.

1- 18 pin connector
1- 8 pin connector " For 2 CPU's via a Kit.

You're going to have to find out what goes where and what is missing.

ATX- 28 Pins
This one-26 pins
🤔
It probably lacks the 3V.

Your VGA connectors are also limited you can use 2X 6 pin or adapt it down to 1X8 pin.

I won't even get into the size and mounting issues.

 

[Eliashenley]

Yeah thanks for the info