Http://192 168 1 1 or http://192 168 0 1 or http://www routerlogin net or http:/

themansmom

Honorable
Nov 15, 2012
1
0
10,510
I have an net gear hooked to my computer ( wireless). But I cant figure out how to put a pass code on to it. Model num WGR614v7 ssn 1J11737M06BE4
 
Solution
RouterSecurity.jpg



Find or Change Your Internet Security Passphrase


1)Open the web browser that you use: Firefox,Google Chrome,IE,or Opera and type in the IP address for your router,and press the Enter key.
http://www.routeripaddress.com/ < Router ip addresses can be found here

2)A window will open and then type in your routers default username and password,and press the Enter key again

http://www.routerpasswords.com/ < Router usernames and passwords found here
***** Username and Password may also be located on the side or bottom of your router *****

3)Navigate to the Wireless Security\Network...
Either on the bottom or side of the router or in the instruction manual there should be an address that you can see to type into the browsers address bar. I think Netgear is the 192.168.0.1 and once you type in that address you will see the login box on your screen where you put the default user name and password. You then go to the security tab and create your password and you can encrypt it if you want then make sure you write it down for safe keeping and save and exit. Now you have your password setup.
 

Dark Lord of Tech

Retired Moderator
RouterSecurity.jpg



Find or Change Your Internet Security Passphrase


1)Open the web browser that you use: Firefox,Google Chrome,IE,or Opera and type in the IP address for your router,and press the Enter key.
http://www.routeripaddress.com/ < Router ip addresses can be found here

2)A window will open and then type in your routers default username and password,and press the Enter key again

http://www.routerpasswords.com/ < Router usernames and passwords found here
***** Username and Password may also be located on the side or bottom of your router *****

3)Navigate to the Wireless Security\Network Security Settings Tab and open to locate or change your WEP or WPA Security Passphrase.
Use WPA because it provides better security.

4)Write this Security Passphrase down and put it in a safe place to access when needed.

5)Save settings and close your browser.


For more info about WEP and WPA Wireless Security visit link below.
http://www.webopedia.com/DidYouKnow/Computer_Science/2007/WEP_WPA_wireless_security.asp
 
Solution

Shaibi

Reputable
Feb 20, 2015
1
0
4,510