[SOLVED] I need a case

[TwinkieArmy]

I need a cheap mid tower case that can fit a micro atx board, and a gtx 1060. anything you guys can recommend? Preferably from amazon but it needs to be mid tower with good airflow and easy component installation.

 

[R_1]

https://pcpartpicker.com/product/3MPfrH/deepcool-case-tesseractsw
this is my go to suggestion for a basic case. it has lights but do not hold that against it.

a bit pricey at the Amazon
https://www.amazon.com/dp/B00NGCS7YA?tag=pcpapi-20&linkCode=ogi&th=1&psc=1

 

[jacob68]

I need a cheap mid tower case that can fit a micro atx board, and a gtx 1060. anything you guys can recommend? Preferably from amazon but it needs to be mid tower with good airflow and easy component installation.

Define cheap? Price range?

 

[Solidjake]

This is better and cheaper. Nice and clean design, big side panel. Just add a fan in the back and you're set

https://www.amazon.com/Fractal-Desi...ements=p_72:1248879011&rnid=1248877011&sr=8-8

 

[TwinkieArmy]

Define cheap? Price range?

from 40$ to 60$

 

[TwinkieArmy]

This is better and cheaper. Nice and clean design, big side panel. Just add a fan in the back and you're set

https://www.amazon.com/Fractal-Design-FD-CA-Focus-WT-W-Tower-Computer/dp/B071G4KDKG/ref=sr_1_8?keywords=computer+case&qid=1571840785&refinements=p_72:1248879011&rnid=1248877011&sr=8-8

definitely considering, but how can i put in a 2.5" ssd

 

[TwinkieArmy]

https://pcpartpicker.com/product/3MPfrH/deepcool-case-tesseractsw
this is my go to suggestion for a basic case. it has lights but do not hold that against it.

a bit pricey at the Amazon
https://www.amazon.com/dp/B00NGCS7YA?tag=pcpapi-20&linkCode=ogi&th=1&psc=1

this one i'm also considering because it has 2.5" ssd space.

 

[TwinkieArmy]

should i go with this one?:

https://www.amazon.com/AeroCool-Cyl...d_r=VSQ9FGYYK955MGTK5590&psc=1&qid=1571805997

 

[Solidjake]

definitely considering, but how can i put in a 2.5" ssd

SSD's can be installed onto to brackets that fit into an HDD tray. Usually comes with the case

 

[Quanticriver]

my vote would be on this one

solid design, good cablemanagment, a pleasure to work with

there is also a windowed version

https://nl.sharkoon.com/product/19311

 

[R_1]

SSD's weigh nothing. I use a single strip of 3m double sided tape when I run out of mounting space and stick it anywhere I can.
even cheap foam tape with a 1LB rating are more than strong enough for 5 SSD's together. stuck to the bottom of the case they are not going anywhere.

 

[thekillerx10]

cooler master cmp 505 is great

 

[TwinkieArmy]

is this a good case?:

https://www.amazon.com/Cougar-MX330...72035779&sprefix=cougar+comput,aps,218&sr=8-2

 

[R_1]

mesh front, side, bottom and top vents, PSU compartment. ports. There is nothing wrong with it if that helps.
its light in weight, which means the metal may a bit on the thin and bendy side, eyes open, handle with care.
the case I suggested weighs in around the same. not a negative just a heads up.

 

[TwinkieArmy]

mesh front, side, bottom and top vents, PSU compartment. ports. There is nothing wrong with it if that helps.
its light in weight, which means the metal may a bit on the thin and bendy side, eyes open, handle with care.
the case I suggested weighs in around the same. not a negative just a heads up.

so is it good? should i purchase it?

 

[R_1]

there is no reason not to.
you will have to live with its looks and only you can decide if you like it. if you like the looks of it go for it.

 

[TwinkieArmy]

there is no reason not to.
you will have to live with its looks and only you can decide if you like it. if you like the looks of it go for it.

i don't care about looks, i just care if it is a good case or not.

 

[R_1]

I'd buy it. it ticks all the boxes.
Ive never used that one so I cannot say from experience.

 

[TwinkieArmy]

ok i will buy it. thanks for your help.