I am looking for some thoughts/tips on why I am getting random BSOD's with my current setup. If someone has done overclocking on a setup like this I would like to see what your settings are. I have done a lot of reading on overclocking these processors and put at least 100 hours into this to no avail. Now to really complicate things I have 2 of the exact same systems 1 is running Linux 24/7 and doing Seti with no issues at the same settings. I have run Prime 95 for over 24 hrs on the Windows based system with no errors/warnings. The drivers on the windows based system are all the latest and I keep them up to date.
System Components:
Full tower case (many air mods for better flow and sound deadening) (cables zip tied down)
Thermalright Ultra 120 extreme (2 fans in push/pull) (max temps 72C under full load)
Asus P6T Deluxe V2
Intel i7 920 D stepping
Asus 8800 GTX at factory settings (waiting for a Nvidia 3XX upgrade)
Cooler Master UCP 1100 Watt Power supply
6 X Noiseblocker S series 120mm fans (2 on front of case, 2 on back of case, 2 on CPU)
Bios Information
Version: 0704
Build Date: 11/12/09
Processor
Type: Intel Core i7 920
Speed: 4000MHz
System Memory: 6136MB (3x2G Corsair, 7-7-7-20 1.65volt)
Ai Tweaker (if not listed, setting is auto or default)
Ai Overclock Tuner Manual
CPU Ratio Setting 20.0
Intel ® SpeedStep ™ Tech Disabled
BCLK Frequency 200
PCIE Frequency 100
DRAM Frequency DDR3-1603MHz
UCLK Frequency 3208MHz
QPI Link Data Rate 7128MT/s
DRAM Timing Control
DRAM CAS# Latency 7 DRAM Clock
DRAM RAS# to CAS# Delay 7 DRAM Clock
DRAM RAS# PRE Time 7 DRAM Clock
DRAM RAS# to RAS# Delay 20 DRAM Clock
CPU Voltage 1.30
CPU PLL Voltage 1.90
QPI/DRAM Core Voltage 1.35
DRAM Bus Voltage 1.66 (memory requires 1.65)
CPU Differential Amplitude 1000mV
Configure advanced CPU settings
CPU Ratio setting 20.0
C1E Support Disabled
Hardware Prefetcher Enabled
Adjacent Cache Line Prefetch Enabled
Intel Virtualization Tech Disabled
CPU TM Function Enabled
Execute Disable Bit Enabled
Intel HT Technology Enabled
Active Processor Cores All
A20M Disabled
Intel SpeedStep Tech Disabled
Intel C-STATE Tech Disabled
System Components:
Full tower case (many air mods for better flow and sound deadening) (cables zip tied down)
Thermalright Ultra 120 extreme (2 fans in push/pull) (max temps 72C under full load)
Asus P6T Deluxe V2
Intel i7 920 D stepping
Asus 8800 GTX at factory settings (waiting for a Nvidia 3XX upgrade)
Cooler Master UCP 1100 Watt Power supply
6 X Noiseblocker S series 120mm fans (2 on front of case, 2 on back of case, 2 on CPU)
Bios Information
Version: 0704
Build Date: 11/12/09
Processor
Type: Intel Core i7 920
Speed: 4000MHz
System Memory: 6136MB (3x2G Corsair, 7-7-7-20 1.65volt)
Ai Tweaker (if not listed, setting is auto or default)
Ai Overclock Tuner Manual
CPU Ratio Setting 20.0
Intel ® SpeedStep ™ Tech Disabled
BCLK Frequency 200
PCIE Frequency 100
DRAM Frequency DDR3-1603MHz
UCLK Frequency 3208MHz
QPI Link Data Rate 7128MT/s
DRAM Timing Control
DRAM CAS# Latency 7 DRAM Clock
DRAM RAS# to CAS# Delay 7 DRAM Clock
DRAM RAS# PRE Time 7 DRAM Clock
DRAM RAS# to RAS# Delay 20 DRAM Clock
CPU Voltage 1.30
CPU PLL Voltage 1.90
QPI/DRAM Core Voltage 1.35
DRAM Bus Voltage 1.66 (memory requires 1.65)
CPU Differential Amplitude 1000mV
Configure advanced CPU settings
CPU Ratio setting 20.0
C1E Support Disabled
Hardware Prefetcher Enabled
Adjacent Cache Line Prefetch Enabled
Intel Virtualization Tech Disabled
CPU TM Function Enabled
Execute Disable Bit Enabled
Intel HT Technology Enabled
Active Processor Cores All
A20M Disabled
Intel SpeedStep Tech Disabled
Intel C-STATE Tech Disabled