IDing a Case

[pmcjury]

I recently bought several cases at a yard sale. I really like one of them and it is in pretty good shape other than a few scratches. The only problem is it is missing the front bezel. I have no idea what model or even what brand case it is but I was hoping someone here might have an idea. Here are the pics of it:

 

[foz]

The closest I could find on Newegg was this Thermaltake Soprano:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811133147
The doors look the same as well as the motherboard area stamping. Its probably an older version of this case.

 

[pmcjury]

That does look pretty close. do you know if it would be possible to buy just the front bezel?

 

[foz]

Check on ebay, you might get lucky! Also you could make one yourself with plexi-glass .

 

[pmcjury]

plexiglass I never thought of that. How would you suggest attaching it thought, screws, bolts, glue?

 

[foz]

I think bolts would give it a cool "industrial" look. I would paint the backside of the plexiglass first. Mask off two round areas if front of the power/activity LED lights.

 

[pmcjury]

that does sound pretty good. I sent customer support at thermal take an email. If i don't here back from them I think i will try my luck with the plexi. Have you ever done anything like this before foz? if so any tips/pointers for someone trying it for the first time?

 

[foz]

Here are some tips-
When cutting or drillng plexi put a thin piece of plywood under it to support it and cut both together. Leave the protective paper on right until you paint or mount the piece. Use a fine tooth blade on your saw when cutting. Measure twice, cut once. Buy extra plexi in case you screw up

 

[pmcjury]

that was very helpful thanks. After thinking about it a hardware store I used to work at sold, plexi. I bet I could sneak in and use the jig we had to cut it once I have my dimensions