[SOLVED] I'm having some BSODS, and crashs while watching videos and recording videos.

[xCoiotex]

dumps not giving me any clues, clean install might be way forward, at least removes doubt of drivers installed.

Yeah about that, I do think a fresh install + the right ram would solve it 100%!

I just installed Thaipoon burner and Ryzen amd calculator V1.73, but not for overclocking the ram, instead to find out the voltage and power requirements to run it stable, this was what I was suspecting, when down-clocking the CPU it got stable in 3200mhz , but losing a lot of performance because the CPU runs at 3600~4200mhz

---------------------------------------------------------------------------------------------------------------------

I've exported this file com Thaipoon burner containing all the specs from my current RAM, and a 3466 mhz recommended timmings.
https://drive.google.com/drive/folders/1mmxfRwuPmGecaPq8XbxbDo7tcYYzTC0B?usp=sharing

----------------------------------------------------------------------------------------------------------------------

I tested the primary values of 3466mhz without actually putting it in 3466mhz, that is, the timings went up and I kept the frequency at 3200mhz

Before it was 16-20-20-38 for 3200mhz, now is 16-21-20-42 and the voltage I put the recommended info of the 3466mhz settings

I've just put the primary timings, not the secondary or tertiary.

I didn't tried this specs for 3466mhz, because I think it would be more instable and for overclocking it needs a lot of fine tunning, and I just want it to be stable without losing much performance

With this applied, until now I didn't get any BSOD's. Maybe its a coincidence or maybe not, I need more time to test. But I managed to get sometimes random crashes while watching youtube, I rarely crash or have BSOD's while working at videos on premiere cc or after effects cc. If I do crash, I know that's something with the software, because of it's reputation.

-----------------------------------------------------------------------------------------------------------------

I've forget to mention but before I came here to ask for help, I was getting blue screens and crashs when I'm trying to play a game called Scrap mechanic, this occurs very fast, in about 5~10 minutes in game, sometimes even from Terraria.

But I didn't get that from other games.

I'll test this config again with those games, and try another configs, if none of those things changes, I'll be reporting here... Thank you all!

 

[xCoiotex]

Hello! I've made some changes and got my system stable without any more blue screens since 06/15, my hint to this was a critical level error in the event viewer showing many times kernel-power when I've had any BSOD's

So I'm leaving this configurations here to help anyone else having the same problem with this mobo and memory.

I went to the bios and changed this parameters

• soc voltage from auto(0.900) to 1.050
• Dram voltage from auto(1200) to 1350
• CCD voltage from auto(0.900) to 1000
• IOD voltage from auto(0.900) to 1000
• VDDP voltage from auto(0.700) to 0.900

Memory configuration

• Power down mode enabled
• Gears down mode enabled
• Comand rate 1T
• 16-18-18-36
• fclk - 1433
• Frequency 2933mhz

With this config I didn't get any BSOD's in 5 days, although I still get rarely some opera crashing at youtube, but for me that's okay

But for me it's not over yet, I'll try changing to 16-20-20-38, 3200mhz to see if this gets the system stable too.

Conclusion, it was power timings on the memory all along, I didn't change anything on CPU, just memory and power related to that..

Thank you all guys 😀for trying to help me solving this, I finally got the system stable enough, I know for sure if I get a compatible memory and fresh install, it would be 100%