installed a slave h/d

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

i have just installed a slave 120g (maxtor)h/d and when booted up xp
reconises it
but when checking the pie chart it only sees it as a 32g how do i
change the settings so it can see it as a 120g (am very new at this and
this is my 1st time at upgrading)



thanks guys



(been at it a week now for some hair pulling lol)


--
fre

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

fre wrote:

> i have just installed a slave 120g (maxtor)h/d and when booted up xp
> reconises it
> but when checking the pie chart it only sees it as a 32g how do i
> change the settings so it can see it as a 120g (am very new at this and
> this is my 1st time at upgrading)
>
>
Have you checked the jumpers on the drive to be sure that the cylinder
limitation jumper is not installed to limit the drive size to 32 GB?
Also does the BIOS show the proper size and are you using the 80 wire
IDE cable that came with the drive?

>
> thanks guys
>
>
>
> (been at it a week now for some hair pulling lol)
>
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Or it was formated as FAT32 in XP. XP will only create a 32GB FAT32 drive,
but can access any size FAT32 drive. You may want to redo the drive as
NTFS.


"Michael W. Ryder" <mwryder@_worldnet.att.net> wrote in message
news:YRPqd.1000587$Gx4.509615@bgtnsc04-news.ops.worldnet.att.net...
> fre wrote:
>
>> i have just installed a slave 120g (maxtor)h/d and when booted up xp
>> reconises it
>> but when checking the pie chart it only sees it as a 32g how do i
>> change the settings so it can see it as a 120g (am very new at this and
>> this is my 1st time at upgrading)
> Have you checked the jumpers on the drive to be sure that the cylinder
> limitation jumper is not installed to limit the drive size to 32 GB? Also
> does the BIOS show the proper size and are you using the 80 wire IDE cable
> that came with the drive?
>
>>
>> thanks guys
>>
>>
>>
>> (been at it a week now for some hair pulling lol)
>>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

The convert command [if input properly] will convert FAT or FAT32 file
systems to NTFS. To see the help file, Start/Run [or: Start/All
Programs/Accessories/Command Prompt]/type "convert /?" [less quote
markers AND be certain a space precedes the slash.
Gene K
Yves Leclerc wrote:
> Or it was formated as FAT32 in XP. XP will only create a 32GB FAT32 drive,
> but can access any size FAT32 drive. You may want to redo the drive as
> NTFS.
>
>
> "Michael W. Ryder" <mwryder@_worldnet.att.net> wrote in message
> news:YRPqd.1000587$Gx4.509615@bgtnsc04-news.ops.worldnet.att.net...
>
>>fre wrote:
>>
>>
>>>i have just installed a slave 120g (maxtor)h/d and when booted up xp
>>>reconises it
>>>but when checking the pie chart it only sees it as a 32g how do i
>>>change the settings so it can see it as a 120g (am very new at this and
>>>this is my 1st time at upgrading)
>>
>>Have you checked the jumpers on the drive to be sure that the cylinder
>>limitation jumper is not installed to limit the drive size to 32 GB? Also
>>does the BIOS show the proper size and are you using the 80 wire IDE cable
>>that came with the drive?
>>
>>
>>>thanks guys
>>>
>>>
>>>
>>>(been at it a week now for some hair pulling lol)
>>>
>
>