Intel E6750 - Command rate 1T or 2TB?

[itsonlydanny]

Hi,

Looking at CPU-Z (v1.46) today, I noticed that the Command Rate for my RAM was set at 2T. I have 2 X 1GB Corsair PC-6400 sticks (800mhz), so that got me wondering as to whether I should change the Rate to the 'faster' 1T?

After Goggling around I for a bit I was still left unsure as to whether my CPU/Chipset would even allow me to run the memory at 1T - yes or no? Also, would switching to IT screw-up my Overclocking, or make it unstable? I ask as everything is hunky-dory and rock-stable at the moment!

Any advice appreciated,

Thanks.

 

[evongugg]

You can change it to 1T in the bios. Make sure you run Memtest86+ or Prime95 to check for errors.
2T is probably more stable.

 

[flyin15sec]

It can screw up you OC. If it doesn't like the 1T, for me it was No POST, then you'd have to reset the BIOS.

Shouldn't be a problem if your BIOS can store profiles or just write down your settings on paper.