MB: Asrock steellegend b550
CPU: 5800x
Gpu: Gigabyte gaming 8g 1070ti
ram: crucial balistix 3200 cl 16
drives: corsair mp600, samsaung evo 850, and a wd hdd...
so ihave some troubles while testing latency with latency mon ...
https://ibb.co/0jjcjz0
the problem is my system doesnt run smove i dont know why i have always problems with hitregs when playing games and sometimes short stutters...
but i dont know where they come from i testet almost everything from sfc/scannow than dism... ram tst ok benchmarks a ok. drivers where uninstalled with ddu and a fresh windows caused the same spikes 2
but i noticed something when the gpu ist pluged in it rest on the chipset/ m.2 heatsink (with 0 place underneath it, not even for a sheet of paper )and is would say 1 side is higher, about 1 or to 2 mm higher. the higher side is the the side showing to the inside of the pc ..
is it possible that the gpu doesnt seat right in the slot. and could i dismantle the armor heatsink without causing problems to the chipset cooling . to test it out
CPU: 5800x
Gpu: Gigabyte gaming 8g 1070ti
ram: crucial balistix 3200 cl 16
drives: corsair mp600, samsaung evo 850, and a wd hdd...
so ihave some troubles while testing latency with latency mon ...
https://ibb.co/0jjcjz0
the problem is my system doesnt run smove i dont know why i have always problems with hitregs when playing games and sometimes short stutters...
but i dont know where they come from i testet almost everything from sfc/scannow than dism... ram tst ok benchmarks a ok. drivers where uninstalled with ddu and a fresh windows caused the same spikes 2
but i noticed something when the gpu ist pluged in it rest on the chipset/ m.2 heatsink (with 0 place underneath it, not even for a sheet of paper )and is would say 1 side is higher, about 1 or to 2 mm higher. the higher side is the the side showing to the inside of the pc ..
is it possible that the gpu doesnt seat right in the slot. and could i dismantle the armor heatsink without causing problems to the chipset cooling . to test it out
Last edited: