Looking for Pin placement for aftermarket case on a gateway mobo.

[comtech1234]

My step mom was in the process of trying to throw out a few year old gateway dx4200. I removed the board from it's lame case and replaced it with a newer micro atx case.

Mobo

Gateway DX4200 Socket AM2+ Micro ATX Motherboard RS780M03G1-8EKRS2HMOD

I cannot for the life of me find the pin placement online for power,restart, and leds.

I would assume because it is an oem mobo. it's still beast for what it is. Any help would be greatly appreciated as I don't want to go the trial and error route and cross something I shouldn't

 

[clutchc]

Does the FP header on the board match this?

 

[comtech1234]

Does the FP header on the board match this?

Yes that is exactly how it looks.

 

[clutchc]

See if this matches for you. I'd try one pair of wires at a time, testing between pairs.
https://panam.gateway.com/s/MOTHERBD/Shared/4006272R/4006272Rmvr10.shtml

This may not be your exact board, but it is a Foxconn, and FP header connections are pretty consistent across similar boards.

 

[comtech1234]

I would have to think that is spot on man. I tried going to a few links from there and I returned bad gateways. Thanks for being awesome. Attached is the google photo of the board in question resembling the exact same board you posted. Couldn't use img tag as something with google🙁 and it's 16MP. Thanks again clutch

https://goo.gl/photos/JzTcY1pi38Go2xd37