[SOLVED] MacOs on intel pentium 5300?

[grega9]

Can I instal a macos for example el capitan or sierra maybe even high sierra on intel pentium e5300 with 4gb ram, amd radeon hd 4650 1gb and will it be complatible with any of macos version I just want to have a cheap hackintosh system to try the macos. thank you for your replies

 

[Barty1884]

https://www.tonymacx86.com/
^ Probably going to be a better, specific resource in this case.

It can be difficult to just slap MacOS onto any old hardware, and there's usually more considerations for picking out components (including motherboard).
I'm not saying it can't be done, but it's probably not going to be particularly easy...

 

[mana1111]

There are many articles regarding custom builds for MAC OS on https://www.tonymacx86.com/ as Barty mentioned above.

Here are some links to E500 and HD 4650 systems work with Sierra

ATI Radeon HD 4650 High Sierra Driver

Hi everyone I just made a fresh install of High Sierra in an old Acer Aspire m3800 desktop. It has a Intel Core2 Quad processor, 6 Gb RAM, 160 GB HDD, and a ATI Radeon HD 4670 1Gb Graphics Card. Theoretically it should work out of the box after the Multibeast installation. I also added the...

www.tonymacx86.com

[SUCCESS] How to install El Capitan on Pentiums and Celerons

Hi guys yesterday I succesfully installed OS X El Capitan 10.11.2 My build is: MSI Z97 PC Mate Intel Pentium G3460 Palit Geforce GTX 750 Ti 8GB Ram So here is what I did: 1. Created a bootable UNIBeast pendrive with Clover 2. I set up my BIOS. First u need to enter the BIOS with pressing End...

www.tonymacx86.com

Sierra on Pentium E5300 Wolfdale-3M

Good morning, I have a board (AsRock 775i945GZ) that max cpu support is pentium E5300 aka Wolfdale-3M in 45 nm process (with SSE4.1 disabled) , but Core 2 Duo E7XXX or E8XXX have SSE4.1 instruction set and are from the same family and stepping (R0). I putted an E7500 in this board but doesn´t see...

www.insanelymac.com

you should check on tonymacx86 if your board is suitable for this though.
This way or the other it is much more better to chose the suitable components for the PC in order to have a stable and full potential Mac OS system.

 

[grega9]

There are many articles regarding custom builds for MAC OS on https://www.tonymacx86.com/ as Barty mentioned above.

Here are some links to E500 and HD 4650 systems work with Sierra

ATI Radeon HD 4650 High Sierra Driver

Hi everyone I just made a fresh install of High Sierra in an old Acer Aspire m3800 desktop. It has a Intel Core2 Quad processor, 6 Gb RAM, 160 GB HDD, and a ATI Radeon HD 4670 1Gb Graphics Card. Theoretically it should work out of the box after the Multibeast installation. I also added the...

www.tonymacx86.com

[SUCCESS] How to install El Capitan on Pentiums and Celerons

Hi guys yesterday I succesfully installed OS X El Capitan 10.11.2 My build is: MSI Z97 PC Mate Intel Pentium G3460 Palit Geforce GTX 750 Ti 8GB Ram So here is what I did: 1. Created a bootable UNIBeast pendrive with Clover 2. I set up my BIOS. First u need to enter the BIOS with pressing End...

www.tonymacx86.com

Sierra on Pentium E5300 Wolfdale-3M

Good morning, I have a board (AsRock 775i945GZ) that max cpu support is pentium E5300 aka Wolfdale-3M in 45 nm process (with SSE4.1 disabled) , but Core 2 Duo E7XXX or E8XXX have SSE4.1 instruction set and are from the same family and stepping (R0). I putted an E7500 in this board but doesn´t see...

www.insanelymac.com

you should check on tonymacx86 if your board is suitable for this though.
This way or the other it is much more better to chose the suitable components for the PC in order to have a stable and full potential Mac OS system.

Hey thanks for reply I forgot to tell that in my system the is a gigabyte pa31 es3g motherboard

 

[mana1111]

Hey thanks for reply I forgot to tell that in my system the is a gigabyte pa31 es3g motherboard

I believe your board will be hard for Sierra. You should really check tonymack86 they have a variety of information regarding builds over there.