Question Macrium cloned disk missing partitions. Please help

[fogert las]

What's the deal with HDtune health?
Why can't you show that?

Use free HDtune 2.55 version.
https://www.hdtune.com/download.html

after a bit of fiddling around i think i figured it out

https://imgur.com/a/aBpQJjC

View: https://imgur.com/a/aBpQJjC

 

[fogert las]

Run it and show screenshot with Health tab (unless health tab is empty).
You can also run error scan. See, if that causes any error messages.

how is this?

https://imgur.com/a/aBpQJjC

View: https://imgur.com/a/aBpQJjC

 

[SkyNetRising]

how is this?

Well ... technically the drive is considered failed.
If it was Samsung drive, it would have been already locked in read only mode and
would not be usable for anything other than recovering data.

 

[fogert las]

Well ... technically the drive is considered failed.
If it was Samsung drive, it would have been already locked in read only mode and
would not be usable for anything other than recovering data.

oh wow. what do i do from here?

 

[SkyNetRising]

What I'd suggest you to do ...
get yourself another drive (external HDD perhaps) - 1TB at least.

Use R-Drive Image software to make image of OS drive.
It allows skipping bad/unreadable blocks.

Then restore image to new NVME drive.

Make sure, you a have heatsinks on both your NVME drives.
Both of them are PCIE 4.0 drives and require heatsinks.
Old drive reported being overheated. It may have lead to failure of the old drive.

 

[fogert las]

What I'd suggest you to do ...
get yourself another drive (external HDD perhaps) - 1TB at least.

Use R-Drive Image software to make image of OS drive.
It allows skipping bad/unreadable blocks.

Then restore image to new NVME drive.

Make sure, you a have heatsinks on both your NVME drives.
Both of them are PCIE 4.0 drives and require heatsinks.
Old drive reported being overheated. It may have lead to failure of the old drive.

Thanks for all the help. Unfortunately I'm not the most financially stable person and it took a lot to get the new ssd. I'll settle for just installing windows on the new drive and slowly moving my stuff over. Thank you

 

[SkyNetRising]

I'll settle for just installing windows on the new drive and slowly moving my stuff over.

R-Drive image software may allow copying directly drive to drive.
Then additional drive would not be necessary.
I'm just not sure, if it allows skipping bad/unreadable blocks in this mode.
You could as well try it.