Mix and match speeds of storage devices within single RAID

healthyman

Honorable
Jun 25, 2012
17
0
10,510
I have a challenge:

Under "specifications" and "Storage ports" for this motherboard:

http://www.businessdirect.bt.com/products/asus-intel-ultimate-bundle--includes-p9x79-pro-motherboard--intel-core-i7-3930k---16gb-ddr3--7VJJ.html

It says:

"2 x SATA-600 (RAID), 2 x SATA-600, 4 x SATA-300 (RAID), 2 x powered eSATA-600"

I have three 512GB SATA-600 SSDs that I want to put together in a RAID 0 in order to temporarily store a 1.2 TB array. (I am aware that the more SSDs I put in a RAID 0 the more chance of failure, I still want to do this).

If the 6 storage devices built into that motherboard that are labelled as having RAID control are all controlled by the same RAID controller, perhaps I could put 2 of the SATA-600 SSDs in the SATA-600 slots, and one of them in the SATA-300 slot, then underclock the two SATA-600 ones so that they transfer at the same speed as the SATA-300 one ----- would this work ?

However, I'm not sure if this motherboard has two separate RAID controllers (one for the 2 x SATA-600, and one for the 4 x SATA-300) ... or one RAID controller controlling everything. Does anyone know ??

If there's two separate controllers, I've heard that I'll be able to combine the two SSDs connected to the SATA-600 (RAID) slots, with the one SSD connected to the SATA-300 (RAID) slot "dynamically in Windows" ... I don't have a clue what that means ---- any ideas ??

I do not care at all about speed .... all I want to do is put a 1.2 TB array on this RAID array with three 512GB SATA-600 SSDs, with this motherboard that says under storage ports:

"2 x SATA-600 (RAID), 2 x SATA-600, 4 x SATA-300 (RAID), 2 x powered eSATA-600"

without buying another RAID controller.

Is it possible ???

 
The P9X79 PRO has 3 SATA controllers (Intel, Marvell, & ASMedia).
The Intel & Marvell controllers support RAID.




Yes, you can connect your 3 SSDs to any of the 6 Intel ports in any combination and they will work in RAID-0; no need to underclock anything.

For best performance connect 2 of the drives to the 6Gb/s ports.
 

healthyman

Honorable
Jun 25, 2012
17
0
10,510
Thank you so much Dereck for replying!

That sounds promising. However I'm hearing conflicting things now..

I got impatient and called my supplier to ask about this and he didn't know so he asked his colleagues, he said that unanimously they agreed that the 2 Intel SATA-600s were controlled by one RAID controller, and the 4 Intel SATA-300s were controlled by a different RAID controller, and that they highly doubted I could connect three 512GB SSDs across both RAID controllers and then store a 1.2TB matrix in a RAID 0 configuration ...

I really hope that YOU are right though, because that would make my life so much easier !! (no need to buy a PCIe RAID controller, can just use the ones built into the motherboard)

I don't mean to sound like I'm "challenging you" .. but I really need to make sure this works -- do you have any references that I can read into ??

Thank you so much Dereck, your post really made my day =)