Question Mixing RAM

[igugf]

Hello everyone!
I got 2 new sticks from a coworker and though to install it into my system.
The sticks I got installed are currently Kingston FURY Beast 2x8GB 3600MHz and got from a coworker HyperX Predator 2x8GB 3200MHz kit. I was wondering if a fry my system because of the diffrent speed?

 

[rgd1101]

it won't fry your system. worst case is the system not booting or bsod

 

[bill001g]

Pretty much if the memory will fit on the motherboard without you forcing it into a slot it has a chance to work.

You can only try it and see. Worst case the machine will not boot at all.

What is more likely is you can get it to work at much lower speed than is rated. Generally for most people more memory even it is running at a slower speed is still better than running less memory at higher clock rates.

Note be very patient when you are testing. The motherboard will try different settings and it can take a number of minutes before it fails or boots. Try to turn off any of the memory overclock like XMP in the bios before you add the new memory. If you can get it to run at the base clock speeds then try to turn on overclock and see what happens. You might in the long run have to set the voltages and clock setting yourself.

 

[bill001g]

A added note just because it boots does not mean it is stable. Boot memtest64+ from a usb and let it run at least 1 pass. If it can pass this normal usage will have no issues.

 

[igugf]

Pretty much if the memory will fit on the motherboard without you forcing it into a slot it has a chance to work.

You can only try it and see. Worst case the machine will not boot at all.

What is more likely is you can get it to work at much lower speed than is rated. Generally for most people more memory even it is running at a slower speed is still better than running less memory at higher clock rates.

Note be very patient when you are testing. The motherboard will try different settings and it can take a number of minutes before it fails or boots. Try to turn off any of the memory overclock like XMP in the bios before you add the new memory. If you can get it to run at the base clock speeds then try to turn on overclock and see what happens. You might in the long run have to set the voltages and clock setting yourself.

Ah thanks I will try that. Is it like automaticly trying to find a XMP profile that works?

 

[Gururu]

It will not damage your system. You may notice something quirky (like reduced speed or timings), or may not, but the advantage of more RAM may outweigh all.

 

[igugf]

For now is trying to boot? My GPU RGB is off. Fans are all on. No Display. No RGB for mouse and keyboard.

 

[igugf]

It will not damage your system. You may notice something quirky (like reduced speed or timings), or may not, but the advantage of more RAM may outweigh all.

I dont think there is a big diffrence between 3200MHz and 3600MHz