Question Motherboard dont boot with second CPU

manuwieder

Commendable
Jan 8, 2019
18
0
1,510
Hi guys,
I bought an Intel S5520HC and 2 Xeon X5670, when I turn on the Server the “Beep Code” 1-5-4-4 ring. The official Error Code don't help me. I tested the mainboard, when I only have one CPU in the mainboard the server start normally. Have you any advises or tips.
 




As PSU I have an Seasonic M 12 II Bronze Evo
 
Hey,
thanks for the quick response. I have tested your link but, it says noting useful. I have the problem that I can't return the MB, because I bought it on eBay and the seller said no return. Have some other ideas what I can make?
 
Sorry I don't know, but read the linker, that may help. https://forums.intel.com/s/question/0D50P00004907wcSAA/auxiliary-signal-power-detail?language=en_US

Also I read the MB service guide again, they list the PSU requirement: A minimum of 550 W is recommended, or decide your system power supply capacity using the Intel® Power Budget Tool. Your supply must provide a minimum of 3 amps of 5-V standby current or the board will not boot.

So try the Intel® Power Budget Tool https://www.intel.com/content/www/us/en/support/articles/000008371/server-products.html
 
Hi, sorry that i dont wrote back, I was abroad.
So i bought the PSU: EVGA 750 GQ. I tested first the PSU with one CPU -> worked fine, then I tested it with the second CPU but I get the same error (Beep Code 1-5-4-4). So I need your help again.