I have a (1050ti) that whenever I plug into my motherboard a (gigabyte ga 78 lmt usb3 r2)
Will stop any power from going to all my USB ports and won't display a signal. Whenever I plug in an older graphics card a (gt730) everything works seemly fine there were a few times when even with the 730 some ports wouldnt get power. Could this be an issue with my motherboard not being able to supply enough power anymore or just an issue with the graphics card. I put a new psi in so I know that's not the problem
AMD FX-6300
deep cool with heat sink
gigabyte GA 78 LMT usb3 r2
2x8GB ddr3 1600mhz
Seagate Barracuda 1tb
GTX 1050ti
TOUGH POWER GX2 600W
Phanteks Eclipse P300
Windows 10
Sceptre 144hz 24 inch
Power supply is brand new as I purchased It originally thinking it was a problem with the PSU
Will stop any power from going to all my USB ports and won't display a signal. Whenever I plug in an older graphics card a (gt730) everything works seemly fine there were a few times when even with the 730 some ports wouldnt get power. Could this be an issue with my motherboard not being able to supply enough power anymore or just an issue with the graphics card. I put a new psi in so I know that's not the problem
AMD FX-6300
deep cool with heat sink
gigabyte GA 78 LMT usb3 r2
2x8GB ddr3 1600mhz
Seagate Barracuda 1tb
GTX 1050ti
TOUGH POWER GX2 600W
Phanteks Eclipse P300
Windows 10
Sceptre 144hz 24 inch
Power supply is brand new as I purchased It originally thinking it was a problem with the PSU
Last edited: