MSI 760GMA P34 no support for Windows 10??

[Guest]

So I have an MSI 760GMA P34 running Windows 10.

I go to the MSI website to download my drivers, but don't see an option for Windows 10!!

What do I do??

 

[crispy07]

So I have an MSI 760GMA P34 running Windows 10.

I go to the MSI website to download my drivers, but don't see an option for Windows 10!!

What do I do??

 

[crispy07]

Did you ever figure out how to make the 2 work. I'm in the same boat.

 

[johnsalinas0217]

So I have an MSI 760GMA P34 running Windows 10.

I go to the MSI website to download my drivers, but don't see an option for Windows 10!!

What do I do??

MSI sees the motherboard out of date, and that is why you only support up to windows 7. Just install those drivers, and you shouldn't have any problems with running windows 10 on the computer. I say this because i have the same motherboard, and already talked to MSI about the motherboard support for windows 10 drivers.

 

[ohiou_grad_2006]

Normally for most older systems, Windows 10 seems to do a good job picking up the hardware and knowing what it is. But yes, try to use the Windows 7 drivers. They will likely work.

 

[crispy07]

I tried that just a few minutes ago and got the same error message ive been getting. It says error code Ox505 Windows encountered an unexpected error. Verify install sources are accessible and restart install. A media driver your computer needs is missing. This could be a DVD, USB or Hard Disk Driver. We unplugged the HDD and tried again with the same error code. My computer guy had to get home so I let him take it so he could work on it tomorrow. Any idea what that code is for( more specifically)? We also downloaded the GPU drivers and still the same code. Any other ideas or suggestions?

 

[crispy07]

Finally, I got it to work. I had tried all the suggestions and despite how it sounds from the help I was getting, I was not doing anything wrong. I ended up making a bootable USB like I had already done 10+ times. Idk what was different but I got the same error except unlike before it would allow me to go into my USB drive files. This whole time when I did get it to try to install Windows it would take about 5 seconds and I would get the missing media error. If I clicked on my "C" drive/USB drive it would immediately go back to the error screen so I couldn't even look in that drive. I had also downloaded every imaginable driver I could find, and put them on the USB drive after formatting with Rufus. I selected a few different drivers and it kept saying no drivers detected. Finally I clicked on the ASMedia SATA driver and it worked. It was doing everything within my knowledge that showed it didn't need a driver but like I said wouldn't even let me look and see or try any up until this point. After that it fully installed with no other problems at all. Thanks for everybody that tried to help and sorry if I had any attitude as I was extremely frustrated and was doing what was suggested exactly as my bios allowed.

 

[crispy07]

7

 

[ohiou_grad_2006]

Glad it all worked out. Strange it have you so many fits. Usually on older hardware Windows 10 loads right up and goes out picks up what drivers it needs from online.