HELP!?HELP!?HELP!?HELP!?HELP!?HELP!?HELP!?HELP!?
I have the above KT600 MoBo with a AMD Barton 2800+ with 512MB of Kingston RAM. BUT reading through the articles at THG on what is advised to get the most out of my HardWare,is a frustrating cause on my end because I just can`t get it right.I hate this MoBo.Apparretly I should set the FSB to 200Mhz, RAM speed to 400MhZ and the rest is based on CL 2.0 & 3-2-6. The PC fails to boot up as soon as I set the FSB to 200Mhz(it only handles 166MHz), don`t even let me start with setting the multiplyer becasue it doesn`t work as well, fails to boot and also as soon as I set the CL to 2, also fails??I wanna break something at this point BUT before I do,I thought I will ask the forum here @ THG.Please help me with what exactly I should do to attain the best out of this monstrousity.Please advise THG Gurus.
Regards J_freak
I have the above KT600 MoBo with a AMD Barton 2800+ with 512MB of Kingston RAM. BUT reading through the articles at THG on what is advised to get the most out of my HardWare,is a frustrating cause on my end because I just can`t get it right.I hate this MoBo.Apparretly I should set the FSB to 200Mhz, RAM speed to 400MhZ and the rest is based on CL 2.0 & 3-2-6. The PC fails to boot up as soon as I set the FSB to 200Mhz(it only handles 166MHz), don`t even let me start with setting the multiplyer becasue it doesn`t work as well, fails to boot and also as soon as I set the CL to 2, also fails??I wanna break something at this point BUT before I do,I thought I will ask the forum here @ THG.Please help me with what exactly I should do to attain the best out of this monstrousity.Please advise THG Gurus.
Regards J_freak
Facebook
Twitter
Instagram