Question Multiple BSOD Errors

Jun 13, 2019
5
0
10
0
I am having some issues with a couple computers. I have semi-recently upgraded both of them to windows 10 from windows 7, and ever since the upgrade I've been getting multiple BSOD errors every other day. I ran multiple memory tests which came back with no errors, but eventually I ended up reinstalling windows 10 again. I am getting the same BSOD errors on both computers again after the windows 10 reinstall. Here are the specs:
RAM: 32 GB DDR3 1600 (4x8GB) PC3-12800 G-Skill
CPU: Intel i7 4790K (4.0GHz)
MOTHERBOARD: GIGABYTE H97-D3H - on ONE and - GIGABYTE Z97-SLI on the other
GPU: NVIDIA Quadro K2200
From what I can tell it's got to be hardware related, the problem is, I just find it rare for the issue to start happening on both computers as soon as I installed windows 10. It almost seems like an incompatibility problem with the motherboard/s and windows 10. I'm not sure. I've also looked at the dump files, but I'm not 100% sure what I'm looking at. I've uploaded the dump files for the computer with the H97-D3H if anyone wants to look at them: https://www.dropbox.com/s/bukz1h4tjuar1ms/MINIDUMP.zip?dl=0
Any help would be greatly appreciated! I have been trying to figure this our for quite some time.
 

gardenman

Admirable
Herald
Hi, I ran the dump files through the debugger and got the following information: https://pste.eu/p/7Hs6.html
File information:082919-8390-01.dmp (Aug 29 2019 - 18:10:04)
Bugcheck:ATTEMPTED_WRITE_TO_READONLY_MEMORY (BE)
Probably caused by:memory_corruption (Process: System)
Uptime:0 Day(s), 9 Hour(s), 27 Min(s), and 49 Sec(s)

File information:082919-7437-01.dmp (Aug 29 2019 - 19:50:16)
Bugcheck:PAGE_FAULT_IN_NONPAGED_AREA (50)
Probably caused by:memory_corruption (Process: svchost.exe)
Uptime:0 Day(s), 1 Hour(s), 38 Min(s), and 44 Sec(s)

File information:082919-6125-01.dmp (Aug 29 2019 - 08:41:20)
Bugcheck:SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007E)
Probably caused by:memory_corruption (Process: acwebbrowser.exe)
Uptime:0 Day(s), 17 Hour(s), 09 Min(s), and 54 Sec(s)

File information:082819-6031-01.dmp (Aug 28 2019 - 08:34:57)
Bugcheck:KERNEL_SECURITY_CHECK_FAILURE (139)
Probably caused by:memory_corruption (Process: System)
Uptime:0 Day(s), 10 Hour(s), 22 Min(s), and 41 Sec(s)

File information:082819-5781-01.dmp (Aug 28 2019 - 15:30:42)
Bugcheck:MEMORY_MANAGEMENT (1A)
Probably caused by:memory_corruption (Process: Revit.exe)
Uptime:0 Day(s), 6 Hour(s), 54 Min(s), and 12 Sec(s)
Possible Motherboard page: https://www.gigabyte.com/us/Motherboard/GA-H97-D3H-rev-10
There is a BIOS update available for your system (version F7). You are using version F5. Wait for additional information before deciding to update or not. Important: Verify that I have linked to the correct motherboard. Updating your BIOS can be risky. Never try it when you might lose power (lightning storms, recent power outages, etc).

This information can be used by others to help you. I can't help you with this. Someone else will post with more information. Please wait for additional answers. Good luck.
 

Colif

Win 10 Master
Moderator
Did you clean install win 10? You mention upgrades, if you just upgraded the installs from 7 to 10 it could be a old driver causing issues. I would try a clean install and see if that removes the BSOD.

I ran multiple memory tests which came back with no errors
Did you use memtest? if not, Try running memtest86 on each of your ram sticks, one stick at a time, up to 4 passes. Only error count you want is 0, any higher could be cause of the BSOD. Remove/replace ram sticks with errors.

the bios updates just add support for newer CPU, the top 5 here - https://www.gigabyte.com/us/Motherboard/GA-H97-D3H-rev-11/support#support-cpu - Not going to be bios anyway as 2 different boards

the oldest drivers on PC are from June 2015, the Intel NIC drivers.

win 10 should run fine on boards, I have a Z97 board with a 4690k and Win 10 runs fine. Your 2 PC aren't even old in my eyes :)
 

ASK THE COMMUNITY

TRENDING THREADS