Question My BIOS screen is Buggy and Choppy, any reason why ?

[Simple X]

So my motherboard is a MSI B360M PRO-VDH and before i can access the bios normally but lately I want to install Linux so I have to open my BIOS and walaa its buggy and I don't now why
https://ibb.co/zhgbbb2

20191004-190902 hosted at ImgBB

Image 20191004-190902 in Simple X's images album

ibb.co

https://ibb.co/Jtm6dPd

 

[Diddly]

Have you tried to reset the BIOS back to defaults or connecting a different monitor?

 

[Simple X]

I have 3 monitors attached to it, does it mean that I have to plug in only one ? also what you mean of resetting the bios is resetting the cmos ? because if it is using the interface within the bios the I can't access it because of what you see in the picture. I cant even access the F11 or boot menu because the screen just go "freeze" on me

 

[DMAN999]

Try connecting to just 1 Monitor then go into the BIOS and see if it looks, acts normally.
If NOT Clear the CMAS following these steps:

• Unplug the PC (PSU).
• Then press the Power Button for at least 30 seconds.
• Use a flat headed screwdriver to short the CLR CMOS (JBAT1) Jumper (Touch both jumper pins with the screwdriver) for at least 15 seconds.

JBAT1 - location shown on Page 7 of your manual:
https://www.msi.com/Motherboard/support/B360M-PRO-VDH#down-manual

• Plug the PC back in.
• Press the Power Button to turn the PC on.
• Repeatedly tap the DEL key
• A screen should come up telling you to press the F1 key, do that.
• Set the Optimized Default settings and Press OK (this is on the EXIT tab)
• Save and exit the BIOS.
• Tap the DEL key again to enter the BIOS and change any settings you want changed then save and exit again.

 

[Simple X]

OK so, I just plugged it to 1 monitor and it fixed it. Does that mean that I can only plug one monitor to set something on the BIOS menu ?