Question My M.2 NVMe is not detected either by my bios or by my board

[foreignsanxd]

5 days ago I've tried to use my PC as I normally do(all components were bought 6 months ago except by the disk in question) , but it doesnt boot and just appears the bios settings without boot options and doesnt show the M.2 where I had installed the OS(Windows 10), for more that I try and changue some settings (Disabling and enabling CSM)from the bios it keeps stuck on bios settings.The only thing that has worked is removing the M.2 stick for some minutes and reconnect it or reseting the bios via CMOS battery but its requires some effort.After it boots I've tested the M2 with CrystalDisk and all my disks are fine and properly working acording to crystaldisk.
MOBA=B760 DS3H AX
M.2 NVMe= WD SN 550
CPU= I5 12600k
GPU= Asus RTX 4060 TI
One stick of 16 GB of Ram and a Thermal peerless asassin 120E cooler

https://imgur.com/a/xdhGpGY

View: https://imgur.com/gallery/xdhGpGY

 

[Lutfij]

You're currently on BIOS version F1. With that in mind;
https://www.gigabyte.com/Motherboard/B760-DS3H-AX-rev-1x/support#support-dl-bios
update the BIOS to version F8 and then clear the CMOS and then replace the battery and the drive to see if the boot process goes through.

To also point out, you might want to take an eraser and wipe the gold contacts on the drive to remove any carbon deposits.