As a followup on this, I installed Nero 7. I successfully burned a few data DVDs with backups of web sites, etc. as well as one with 4gb video and audio files.
I'm now trying to burn another disc of a/v files, and I'm getting verification errors. Tried a second disc and got the same errors, so I guess I'm stuck, and not sure how to proceed.
Following is the burn log. I'll also send this to Nero support, but it takes days to get a reply from them, so if anyone can shed any insight as to the problem I'd appreciate it.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C
rogram FilesNeroNero 7CoreWnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-3550A >Version: 1.05 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3550A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 77MB (79340kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.3.2006
UDF compilation
7:40:57 PM #1 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
7:40:58 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
7:40:58 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
7:40:58 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-3550A running
7:41:00 PM #5 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
7:41:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1729583 (384:21.08, 3378MB)
7:41:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
7:41:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+RW
7:41:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
7:41:33 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1729584 (1729584) = #1729584/384:21.9
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1729584 blocks [E: _NEC DVD_RW ND-3550A]
--------------------------------------------------------------
7:41:33 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3542188032, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1729584 | lead-out | 1 | 0x41 | 0x00
7:41:33 PM #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:41:33 PM #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:41:34 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
7:41:34 PM #15 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
7:41:34 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
7:41:34 PM #17 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
7:41:34 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:46:04 PM #19 Text 0 File WriterStatus.cpp, Line 116
<E: _NEC DVD_RW ND-3550A> start writing Lead-Out at LBA 1729584 (1A6430h), length 0 blocks
7:46:04 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:46:05 PM #21 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 9.5x (13,176 KB/s)
7:46:05 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
7:46:05 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:46:05 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x05d1d600: Len x804
7:46:05 PM #25 Phase 98 File dlgbrnst.cpp, Line 1730
Start formatting disc before burning
7:46:42 PM #26 Phase 100 File dlgbrnst.cpp, Line 1730
Formatting disc was successful
7:46:43 PM #27 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
7:57:23 PM #28 Text 0 File WriterStatus.cpp, Line 116
<E: _NEC DVD_RW ND-3550A> start writing Lead-Out at LBA 1729584 (1A6430h), length 0 blocks
7:57:24 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:57:25 PM #30 Text 0 File DVDPlusRW.cpp, Line 891
Media-Format will be stopped after burning
7:57:25 PM #31 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
7:58:08 PM #32 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)
7:58:08 PM #33 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started
8:02:33 PM #34 SPTI -1093 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 00 00 15 2B F0 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 15 2B F0 0A 00 00 00 00 02
Buffer x0b5ad200: Len x8000
8:02:35 PM #35 SPTI -1093 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 00 00 15 2C 00 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 15 2C 00 0A 00 00 00 00 02
Buffer x0b5ad200: Len x8000
8:02:37 PM #36 SPTI -1093 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 00 00 15 2C 10 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 15 2C 10 0A 00 00 00 00 02
Buffer x0b5ad200: Len x8000
8:02:40 PM #37 SPTI -1093 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 00 00 15 2C 30 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 15 2C 30 0A 00 00 00 00 02
Buffer x0b5ad200: Len x8000
8:02:40 PM #38 SectorVerify 20 File Cdrdrv.cpp, Line 9785
Read errors from sector 1387504 to 1387551
8:02:42 PM #39 SPTI -1093 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 00 00 15 2C 40 00 00 10 00 00 00
Sense Area: 0xF0 00 03 00 15 2C 40 0A 00 00 00 00 02
Buffer x0b5ad200: Len x8000
8:04:51 PM #40 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:04:52 PM #41 SectorVerify 20 File Cdrdrv.cpp, Line 9785
Read errors from sector 1387568 to 1387599
8:04:52 PM #42 Phase 81 File dlgbrnst.cpp, Line 1730
Data verification failed
Existing drivers:
Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)