Need some help

[Bobberz]

Okay, so I finally finished my computer build and was happy to see it working, but then I realised that my graphics card wasn't installed. So I tried to fix it and so just made sure it was connected.
Tried to check if it was working but for some reason my monitor now just says "No signal" (checked with different monitors & different VGA Cables) and so cannot use the computer right now.

Also will need some help on why my graphics card isn't working. I've made sure to plug it in all the way and even downloaded the drivers but i don't know.

(EVGA Geforce GTX 970)

 

[TommyTheTank]

Did you make sure to plug the cable into the graphics card itself? (the 970 doesn't even have a VGA port so Im not sure how you used different VGA cables, unless you are using an adapter)

If you are using an adapter, and it is plugged into the DVI port of the 970, put the cable back into the integrated graphics port, try looking around in bios for a display setting that says "Integrated" or "IGPU" and change it to "PCI-e", save and exit, and swap the cable back to the 970

 

[Bobberz]

Did you make sure to plug the cable into the graphics card itself? (the 970 doesn't even have a VGA port so Im not sure how you used different VGA cables, unless you are using an adapter)

If you are using an adapter, and it is plugged into the DVI port of the 970, put the cable back into the integrated graphics port, try looking around in bios for a display setting that says "Integrated" or "IGPU" and change it to "PCI-e", save and exit, and swap the cable back to the 970

Sorry I meant like the VGA cable things from the PSU (Not the actual VGA cables to connect to my monitor)

 

[Bobberz]

Main Problem now is the monitor not detecting a signal. Not sure what to do

 

[TommyTheTank]

That 970 requires 2 6pin power connectors (the proper name for what you refer to as a VGA cable), so they should both be plugged in at the same time

What power supply do you have?

 

[Bobberz]

That 970 requires 2 6pin power connectors (the proper name for what you refer to as a VGA cable), so they should both be plugged in at the same time

What power supply do you have?

I fixed the issue with the graphics card now bud 😀 all working thank god.

Now just need to work out why my monitor isn't getting a signal