Hello, i just built a new gaming rig and im having a lot of trouble getting it to work properly.
Specs are as follows:
Mobo: Gigabyte Z390 Aorus Master
CPU: i9-9900k
RAM: 32GB G.Skill Trident Z Neo 3600Mhz CL16 (2x16GB)
GPU: EVGA RXT 2080Ti XC Ultra
PSU: Be quiet Straight Power 11 750W (temporary, waiting for my Seasonic Prime Platinum 850W to arrive)
Boot drive: Samsung 970 Evo Plus 1TB
The problem is relatively simple: im getting no signal from the video card, doesnt matter if its through HDMI or DP. Everything runs just fine if i take the 2080Ti out of the PC and run it just from the IGPU, zero problems, instant boot. The 2080Ti is fine, i used it for the past month with my old rig and it was running perfectly okay, i also tested it in another rig today and it worked. I also plugged in a 1060 6GB in the new rig and it also runs perfectly fine with no issues, got instant video via DP. I tested the power cable, PSU, i tried if the card is seated in the PCIE slot correctly, nothing helped. I uptaded mobo's bios, no change.
If i plug the 2080Ti in the second PCIE slot and clear CMOS, im able to get video from onboard HDMI, but the card itself doesnt show up in BIOS, it doesnt show up in device manager, and if i try to install GeForce experience, it says i have no Nvidia GPU plugged it. All of that is quite weird because card's RGB is lit up, the fans are spinning and the backplate is getting warm when i touch it over the die. I also tried switching preferred video output in BIOS to IGFX and booting with the 2080Ti in the first PCIE slot, but in this case im unable to get any video, neither from the 2080Ti nor from the mobo's HDMI.
I tried flashing card's bios, but i was unable to do so due to it not being detected by the system in any way when its in the second slot (and im unable to tell if its detected when its in the first one as i cant get any video then).
I totally run out of ideas, everything is fine by itself. The 2080Ti is fine and working in another rig. Mobo's PCIE slot is fine too, as it works perfectly fine with the 1060 plugged in. PSU seems to be fine as well as the power cable, as its the same one i use to power up 1060 when its in. I dont think RAM or CPU is any issue here, as there is completely no problems when running the rig with 1060 or with no video card at all. The only other issue i encountered here is that i actually have TWO Samsung SSDs, and while one is working just fine as boot drive, the other one is not being detected at all.
Hope you guys can help me, i've been waiting to build this rig for weeks and now its not working, its driving me insane.
Specs are as follows:
Mobo: Gigabyte Z390 Aorus Master
CPU: i9-9900k
RAM: 32GB G.Skill Trident Z Neo 3600Mhz CL16 (2x16GB)
GPU: EVGA RXT 2080Ti XC Ultra
PSU: Be quiet Straight Power 11 750W (temporary, waiting for my Seasonic Prime Platinum 850W to arrive)
Boot drive: Samsung 970 Evo Plus 1TB
The problem is relatively simple: im getting no signal from the video card, doesnt matter if its through HDMI or DP. Everything runs just fine if i take the 2080Ti out of the PC and run it just from the IGPU, zero problems, instant boot. The 2080Ti is fine, i used it for the past month with my old rig and it was running perfectly okay, i also tested it in another rig today and it worked. I also plugged in a 1060 6GB in the new rig and it also runs perfectly fine with no issues, got instant video via DP. I tested the power cable, PSU, i tried if the card is seated in the PCIE slot correctly, nothing helped. I uptaded mobo's bios, no change.
If i plug the 2080Ti in the second PCIE slot and clear CMOS, im able to get video from onboard HDMI, but the card itself doesnt show up in BIOS, it doesnt show up in device manager, and if i try to install GeForce experience, it says i have no Nvidia GPU plugged it. All of that is quite weird because card's RGB is lit up, the fans are spinning and the backplate is getting warm when i touch it over the die. I also tried switching preferred video output in BIOS to IGFX and booting with the 2080Ti in the first PCIE slot, but in this case im unable to get any video, neither from the 2080Ti nor from the mobo's HDMI.
I tried flashing card's bios, but i was unable to do so due to it not being detected by the system in any way when its in the second slot (and im unable to tell if its detected when its in the first one as i cant get any video then).
I totally run out of ideas, everything is fine by itself. The 2080Ti is fine and working in another rig. Mobo's PCIE slot is fine too, as it works perfectly fine with the 1060 plugged in. PSU seems to be fine as well as the power cable, as its the same one i use to power up 1060 when its in. I dont think RAM or CPU is any issue here, as there is completely no problems when running the rig with 1060 or with no video card at all. The only other issue i encountered here is that i actually have TWO Samsung SSDs, and while one is working just fine as boot drive, the other one is not being detected at all.
Hope you guys can help me, i've been waiting to build this rig for weeks and now its not working, its driving me insane.