Question New Build - 1 of 6 SSD's seen by the BIOS that is all - What is going on?

sixty4 · 2024-11-01T12:29:23-0400

I have been replacing parts in my build every few years. I just picked up a ASUS PRIME Z790-V AX motherboard. I updated the BIOS the latest availabel version 1802 dated 10/11/2024. I have several SSS'd older and new ones including WD Blue SA510, Crucial BX500, and older SSD"s being two Samsung 870 QVO-1tb, and 3 older SSD's by Sandisk, Fijitsu and a Toshiba THNSNH256GBST (see photos.)

My machine posts to BIOS, the Asus BIOS will ONLY show the THNSNH256GBST SSD which was the SSD I was last using and has Windows 11 installed. I am using a new cable that came with the new motherboard and the same power cable each time however NONE of the other SSD's will show except the THNSNH256GBST SSD? I suspect this SSD is having issues as it failed a week ago, I reinstalled Windows 11 again and it failed a week later (this was from a different Motherboard, DDR4 memory.) The WIndows 11 install does not see the drive, nor does a windows 10 install which I tried.

I have hooked up some of the SSD's to my Windows 11 laptop via a drive adapter and it can see at lest the drives I tried including the new drives and the Samsung drives.

I called ASUS, the tech simply advised that I Enable CSM (Compatibility Support Module) which I had tried enable and disabled. The tech tells me "that should work." He puts me on hold to "check his other resources" then the phone hangs up.

Does anyone have any ideas, I have tried everthing I know and can find out there? My goal is to probably use the WD Blue SA510 drive for the OS and the two Samsung TB
s for extra storage.

Here are some pics:
SSD Pile:

https://imgur.com/wfidnUo

View: https://imgur.com/wfidnUo

Toshiba shows only in BIOS:

https://imgur.com/0nkuQqM

View: https://imgur.com/0nkuQqM

CSM Settings:

https://imgur.com/c27RSUq

View: https://imgur.com/c27RSUq

Other hardware includes:
Powersupply: EVGA 850 G3
GSkill Ripgaws S5 DDR5 16GBx2 (One installed)

Thanks in advance!

rgd1101 · 2024-11-01T12:44:54-0400

that the boot screen. where the storage?

Lutfij · 2024-11-01T12:47:10-0400

One of your screenshots has the BIOS time set to 00:00, do you need to input your time at every cold boot?

sixty4 · 2024-11-01T13:15:23-0400

rgd1101 said:
that the boot screen. where the storage?

On this image, I am showing the TOSHIBA on the bottom right, this is the only SSD out of 6 that wiill show up but and was the last SSD I had Windows 11 on. The other hard drives are empty or new.

https://imgur.com/0nkuQqM

View: https://imgur.com/0nkuQqM

sixty4 · 2024-11-01T13:18:47-0400

Lutfij said:
One of your screenshots has the BIOS time set to 00:00, do you need to input your time at every cold boot?

That is weird, but looking at it now it is correct. Perhaps the time had not set when I took the photo.

Lutfij · 2024-11-01T13:34:54-0400

Clear CMOS by disconnecting from the wall and display, removing the CMOS battery, press and hold down the power button for 30secs, then replace the CMOS battery with a fresh cell after 30mins.

How old is the PSU in your build? Just an FYI, since you've replaced the motherboard, you will need to reinstall the OS, with only the drive you wish to install the OS onto while everything else is disconnected. Once you've installed the OS in offline mode, manually installed all relevant drivers in an elevated command, then hook up to the www to update your OS. Power down then see if hooking up each drive one by one to the system and powering up to OS with each added drive, assuming none of the other drives have OS partitions on them.

SkyNetRising · 2024-11-01T13:39:42-0400

sixty4 said:
On this image, I am showing the TOSHIBA on the bottom right, this is the only SSD out of 6 that wiill show up

That is Boot priority. It doesn't show all available drives.

Switch to Advanced mode and find screen with sata devices.
It may be necessary to turn off Fast Boot.
Make sure, sata controller is set to AHCI mode.

BTW - You have single ram module. Single module should be placed in slot A2.
Dual channel mode is unavailable, when using single module.
This impacts ram performance negatively.

sixty4 · 2024-11-01T14:51:19-0400

SkyNetRising said:
That is Boot priority. It doesn't show all available drives.

Switch to Advanced mode and find screen with sata devices.
It may be necessary to turn off Fast Boot.
Make sure, sata controller is set to AHCI mode.

BTW - You have single ram module. Single module should be placed in slot A2.
Dual channel mode is unavailable, when using single module.
This impacts ram performance negatively.

"Boot Priorit" in BIOS, Yes but I am only trying one SSD at a time. ONLY the Toshiba will show in the Boot Prioity. If I take the Toshibar drive out and install any of the other drives they do not show up.

Advanced Mode: I disabled Fast Boot, I found this video which is suppose to walk me through locating AHCI mode but my PCH Storage Configuration is greyed out.

View: https://www.youtube.com/watch?v=Pds7cYPuPTQ

RAM: I have two modules but only installed one for now but thanks, I did nove the module to A2. Where should the second module be installed?

USAFRet · 2024-11-01T14:53:30-0400

sixty4 said:
"Boot Priorit" in BIOS, Yes but I am only trying one SSD at a time. ONLY the Toshiba will show in the Boot Prioity.

A drive will only appear in 'Boot Priority' if there is something on it to boot from. AN OS.
A blank drive will not appear there.

sixty4 · 2024-11-01T14:56:27-0400

USAFRet said:
A drive will only appear in 'Boot Priority' if there is something on it to boot from. AN OS.
A blank drive will not appear there.

Ok, make sense but Windows 11 won't recognize any drives but the Toshiba when its installed.

USAFRet · 2024-11-01T14:59:15-0400

sixty4 said:
Ok, make sense but Windows 11 won't recognize any drives but the Toshiba when its installed.

Won't recognize, where?

sixty4 · 2024-11-01T15:02:17-0400

Lutfij said:
Clear CMOS by disconnecting from the wall and display, removing the CMOS battery, press and hold down the power button for 30secs, then replace the CMOS battery with a fresh cell after 30mins.

How old is the PSU in your build? Just an FYI, since you've replaced the motherboard, you will need to reinstall the OS, with only the drive you wish to install the OS onto while everything else is disconnected. Once you've installed the OS in offline mode, manually installed all relevant drivers in an elevated command, then hook up to the www to update your OS. Power down then see if hooking up each drive one by one to the system and powering up to OS with each added drive, assuming none of the other drives have OS partitions on them.

I will try the CMOS Steps you mentioned.

PSU I think is from 2021.

I cannot get the OS installed as Window's won't see any drives but the Toshiba drive, I have been only installing one SSD at a time using the same cables and its the only one Windows will recognize. Is there a format I should do on the drives using another machine and drive adapter? I have tried to format some of them with another machine.

sixty4 · 2024-11-01T15:04:02-0400

USAFRet said:
Won't recognize, where?

When the windows instatllation media gets to the part where it is ready fo me to select a drive to install Windowws on, there are no drives present at all unless I use the failing Toshiba drive.

USAFRet · 2024-11-01T15:12:38-0400

sixty4 said:
When the windows instatllation media gets to the part where it is ready fo me to select a drive to install Windowws on, there are no drives present at all unless I use the failing Toshiba drive.

When you install an OS, have only ONE drive connected.
Reconnect the others later.

I cannot stress this strongly enough.
Only One Drive.

And....start with a fresh OS install, in this system.
Not something that was installed on some other system.

How To - Windows 10 clean install tutorial

If you are looking for the Windows 11 Clean install tutorial, you can find that here: Windows 11 Clean install tutorial (Click here) Otherwise, welcome to the Windows 10 Clean install tutorial This tutorial is intended to help you, step by step, to perform a clean install of Windows...

forums.tomshardware.com

How To - Windows 11 clean install tutorial

Windows 11 Clean install tutorial This tutorial is intended to help you, step by step, to perform a clean install of Windows 11, version 23H2 or newer but can be equally applied to earlier versions which may have some basic differences in the screens you see but will largely remain similar in...

forums.tomshardware.com

sixty4 · 2024-11-01T15:28:20-0400

USAFRet said:
When you install an OS, have only ONE drive connected.
Reconnect the others later.

I cannot stress this strongly enough.
Only One Drive.

And....start with a fresh OS install, in this system.
Not something that was installed on some other system.

How To - Windows 10 clean install tutorial

If you are looking for the Windows 11 Clean install tutorial, you can find that here: Windows 11 Clean install tutorial (Click here) Otherwise, welcome to the Windows 10 Clean install tutorial This tutorial is intended to help you, step by step, to perform a clean install of Windows...

forums.tomshardware.com

How To - Windows 11 clean install tutorial

Windows 11 Clean install tutorial This tutorial is intended to help you, step by step, to perform a clean install of Windows 11, version 23H2 or newer but can be equally applied to earlier versions which may have some basic differences in the screens you see but will largely remain similar in...

forums.tomshardware.com

I didn't explain this well but I have only had a single drive installed each time. And the Toshiba drive was my old drive and had windows on it but I belive it is failing hence why I am trying another new drive. I just noticed it was the only drive that the Windows Install disk would recognize a storage disk on installation.

USAFRet · 2024-11-01T15:29:39-0400

sixty4 said:
I didn't explain this well but I have only had a single drive installed each time. And the Toshiba drive was my old drive and had windows on it but I belive it is failing hence why I am trying another new drive. I just noticed it was the only drive that the Windows Install disk would recognize a storage disk on installation.

A potentially failing drive, with a foreign OS already on it.
Not a good base for troubleshooting.

Install one of your other drives, and try an OS install on it.
See what happens.

yossibac · 2024-11-01T15:55:13-0400

Correct me if I'm wrong, but Bios should detect any good drive connected to the PC regardless of OS installed or not or even if it's formatted or not. That's what Sixty4 is asking: why Bios is not detecting the other drives he owns? Except that one (THNSNH256GBST SSD)

yossibac · 2024-11-01T15:57:15-0400

To be honest, I think that there is a problem with the new Motherboard.

USAFRet · 2024-11-01T16:16:25-0400

yossibac said:
Correct me if I'm wrong, but Bios should detect any good drive connected to the PC regardless of OS installed or not or even if it's formatted or not. That's what Sixty4 is asking: why Bios is not detecting the other drives he owns? Except that one (THNSNH256GBST SSD)

The boot priority can only see what is bootable.
That is the first two pics I see.

So much janky stuff going on, I can't tell WHAT might be broken.
It might be the motherboard. Or it might be the users manipulations. Or something else completely.
No idea.

sixty4 · 2024-11-01T16:34:43-0400

USAFRet said:
A potentially failing drive, with a foreign OS already on it.
Not a good base for troubleshooting.

Install one of your other drives, and try an OS install on it.
See what happens.

Yes, per my original post none of the other 5 drives work, . Two are brand new drives, never used. I used the Toshiba drive to test yes, and it does show however the other 5 drives will not. I do not plan on using the Toshiba drive as I suspect it is failing.

sixty4 · 2024-11-01T16:35:40-0400

yossibac said:
Correct me if I'm wrong, but Bios should detect any good drive connected to the PC regardless of OS installed or not or even if it's formatted or not. That's what Sixty4 is asking: why Bios is not detecting the other drives he owns? Except that one (THNSNH256GBST SSD)

Yes. this is the issue in summary.

USAFRet · 2024-11-01T16:36:13-0400

sixty4 said:
Yes, per my original post none of the other 5 drives work, . Two are brand new drives, never used. I used the Toshiba drive to test yes, and it does show however the other 5 drives will not. I do not plan on using the Toshiba drive as I suspect it is failing.

Connect one of the other drives, in a hopefully working SATA III port.

Boot from whatever Windows Install USB you have.
Get to the part where it asks where...
Show us the screen of it not showing the relevant drive.

Question New Build - 1 of 6 SSD's seen by the BIOS that is all - What is going on?

Distinguished

Don't

Titan

Distinguished

Distinguished

Titan

Titan

Distinguished

Titan

Distinguished

Titan

Distinguished

Distinguished

Titan

Distinguished

Titan

Commendable

Commendable

Titan

Distinguished

Distinguished

Titan

Share this page