Hello,
I'm having issues with getting my new system to post.
Specifications.
Asrock x299e-itx/ac
Corsair Vengeance 32GB (2x16) 2666MHz (CMSX32GX4M2A2666C18)
Intel i9 7900x
Evga 1070 ti SC
Samsung Evo 970 m.2 500gb
Corsair SF600
Nzxt Kraken x52
Problem:
I built the system yesterday with all the components fresh from their boxes. Initially I couldn't get the system to post. Then I removed one ram stick and the system posted and I was able to install windows. I then tried both ram sticks separately in the same slot (A1) to see if one of the sticks was dodgy and it booted fine. Which tells me that both stick function individually. But the minute I add a stick to either one of the other ram slots (B1,C1,D1) trying every combination, the system fails to post. I also tried using B1+C1 etc...but nothing worked when two sticks were inserted.
This morning I cleared CMOS, and reseated the CPU and replugged all the cables, and now it wont even post with one stick of RAM. I just get no signal, and no beeps from the mobo.
Now I imagine its either the Mobo or the Ram that's the issue... I just don't know which one. I can send both back to the retailer, but it will cost me quite a bit to ship back to the UK where I purchased the products. (I live in Norway).
Does anyone have a clue as to what the problem could be?
Thanks in advance!
I'm having issues with getting my new system to post.
Specifications.
Asrock x299e-itx/ac
Corsair Vengeance 32GB (2x16) 2666MHz (CMSX32GX4M2A2666C18)
Intel i9 7900x
Evga 1070 ti SC
Samsung Evo 970 m.2 500gb
Corsair SF600
Nzxt Kraken x52
Problem:
I built the system yesterday with all the components fresh from their boxes. Initially I couldn't get the system to post. Then I removed one ram stick and the system posted and I was able to install windows. I then tried both ram sticks separately in the same slot (A1) to see if one of the sticks was dodgy and it booted fine. Which tells me that both stick function individually. But the minute I add a stick to either one of the other ram slots (B1,C1,D1) trying every combination, the system fails to post. I also tried using B1+C1 etc...but nothing worked when two sticks were inserted.
This morning I cleared CMOS, and reseated the CPU and replugged all the cables, and now it wont even post with one stick of RAM. I just get no signal, and no beeps from the mobo.
Now I imagine its either the Mobo or the Ram that's the issue... I just don't know which one. I can send both back to the retailer, but it will cost me quite a bit to ship back to the UK where I purchased the products. (I live in Norway).
Does anyone have a clue as to what the problem could be?
Thanks in advance!