The motherboard is MSI H510M PRO-E with new processor i3-10105F with GTX 1060 6GB Mini. Problem is that the display gets no signal. There is no EZ-DEBUG LED lit which may indicate the problem in any of the components. Debug LEDs go through cycle one by one, but then all goes off and all fans starts, indicating the system is booting, but no display. I'm positive the graphics card is working fine with my previous motherboard.
I already have RMA'd the motherboard and problem still is same.
If there is any problem with the RAM (DDR4-2400Mhz) (working fine with previous motherboard ), or the new processor, shouldn't the debug LED lit up?
What could be the problem?
Edit 1 - observation is that even if I plug in HDMI in motherboard slot, DEBUG LEDs stil shows no errors despite the processor is F (no integrated graphics)
I already have RMA'd the motherboard and problem still is same.
If there is any problem with the RAM (DDR4-2400Mhz) (working fine with previous motherboard ), or the new processor, shouldn't the debug LED lit up?
What could be the problem?
Edit 1 - observation is that even if I plug in HDMI in motherboard slot, DEBUG LEDs stil shows no errors despite the processor is F (no integrated graphics)
Last edited: