What a buzzkill. New pc all together and a fault right off the bat. I was really skeptical about buying an asrock and it immediately bit me in the ass because I have no troubleshooting to go off of, what the heck. Well no point in complaining any more, this needs fixed. When I first got it together it all started up, fans, hdd makes sound, gpu lights on (except the one near the plug that appears to be a fault light when there's no power, so I think I can rule out the psu). I checked all my connections, 8pin cpu was good, mb main plug wasn't seated in the bottom, still no difference. Tried different ram slots, tried it with the ram out to see if it would do anything different, nothing, not even a beep. I've cleared the cmos via the jumper twice. Unplugged everything besides the main mb plug and cpu plug and still nothing. I don't know what to do, this is my first built pc, I really wish I could get a lead on what's wrong at least. The only thing I know that isn't 100% right right now is my ram is rated at 1.35v and my mb lanes say 1.2v, I noticed it when I put it in, it wasn't advertised, I should be able to increase the voltage anyway. I filled out asrocks tech support form so I'll be waiting on that in the meantime. I dread the thought of taking the cpu out, my cooler gives me nightmares, I'd hate to get the board RMAed and have to wait or have the same problem again.
Asrock z270 killer sli/ac
Intel i5-7600k
Cryorig h7 cooler
G.skill tridentz 2x8gb dual channel 3200mhz 14-14-14-34 1.35v
Evga supernova 750w g3 psu
Gigabyte gtx 1060 GV-N1060G1GAM-6GD 6gb
LG wh14ns40 blu-ray drive
Seagate st1000nm0011 hdd
Pny cs1311 ssd
Fractal design r5 case
Asrock z270 killer sli/ac
Intel i5-7600k
Cryorig h7 cooler
G.skill tridentz 2x8gb dual channel 3200mhz 14-14-14-34 1.35v
Evga supernova 750w g3 psu
Gigabyte gtx 1060 GV-N1060G1GAM-6GD 6gb
LG wh14ns40 blu-ray drive
Seagate st1000nm0011 hdd
Pny cs1311 ssd
Fractal design r5 case