OK I've read both of your posts. But you did not say which drives or drive it would not recognise.
If you are trying to set up raid on the 2 sata driver you need to install the raid drivers before wimdows will recognise them.Also make sure they are enabled and set as raid in the bios.
If it is the IDE drive you are adding, make sure the IDE ports are enabled in the bios. AND that they are not set up as a raid configuration.
We are not mind readers,and most of us have jobs during the day. We do this for fun and to help others.
Now I've read your 3rd post . You have 2 different SATA controllers on the motherboard. One in the chipset,Via controller. The other is an onboard add on chip. Make sure you have the drives connected to the ports you installed the drivers for.This info is in your motherboard manual.
I aint signing nothing!!!<P ID="edit"><FONT SIZE=-1><EM>Edited by Rick_Criswell on 04/18/05 09:41 PM.</EM></FONT></P>