[SOLVED] No signal on monitor (fixed)

[The_Reacher117]

Hello, so I built myself my first computer about a month ago and now I have a problem... I was updating drivers on the MSI Dragon Center app (there was an update for the bios and for bluetooth and wifi). While it was downloading and updating all of this I was listening to music on youtube and then the music started cutting heavily for a good 2-3 minutes. Then the computer started not responding, I did ctrl + alt + delete to see if anything would happen (it did) and then the computer froze... I waited for a couple minutes and then pressed the reset button near the power button on my case... After that I didn't get any signal on my monitor. And there are no debug LEDs turned on.

What I did : I removed the cmos battery, waited for a good 10 minutes and reinstalled it, it did nothing.

I tried shortening the jbat1 pins to reset the bios and it did nothing...

My specs are :
Ryzen 5 3600 (stock cooler)
Msi B450 Gaming Pro Carbon AC
Aorus 2060 Super
32Gb Tridentz rgb 3200mhz Corsair Carbide Spec Delta rgb
Corsair RM650X
500gb sata ssd and 2tb hdd

Any help would be really nice since I really need my computer for school as fast as possible.
Sorry for my probably bad English, I'm French.

 

[Fkort96]

Probably the PC froze up during the bios update; now if you are lucky (and the boot block did not ''went to heaven'') you can try following these instructions: https://forum-en.msi.com/index.php?topic=174985.0

Good luck and have a nice weekend

 

[The_Reacher117]

Ok it worked ! Thank you so much ! I did the ''bios recovery'' thing.

Have a nice day !