Question No signal while factory reset

[wra666]

So i decided to factory reset my computer after getting some malware downloaded, i decided to di a full wipe on my windows 11, and i chose the cloud windows download, the process took long time and at around 60%, and also the screen was blinking on and off the whole process, i decided to go to sleep so i remove the usb from my mouse and keyboard, turned off monitor, and when i came back to check i had no signal, all the cables are firmly on as they should.

I have tried using displayport /hdmi from mobo, tried different monitors and tv.

I dont want to turn the computer off if it is still factory resetting.

My system i fairly new 5 months old, and i have not had any problem at all so far with it so i highly doubt it is hardware issue

Mobo: ASUS ROG STRIX B660-F GAMING WIFI, ATX, DDR5, PCIe 5.0, 3x M.2
Gpu: ZOTAC GAMING GeForce RTX 4090 Trinity OC, PCI Express 4.0, 24GB GDDR6X
Cpu: Intel Core i9-12900K
Ram: Kingston FURY Beast DDR5 RGB 4800MHz 32Gb CL38 (38-38-38), DIMM (2x16GB
Psu: Corsair RM1000x 1000W PSU ATX12V v2.4, 80 PLUS Gold, Fully Modular
Ssd: Kingston FURY Renegade PCIe M.2 NVME SSD 1Tb M.2 SSD, PCIe 4.0, 1TB, 7300/6000 MB/s, PS5 ready

 

[Lutfij]

Welcome to the forums, newcomer!

i decided to go to sleep so i remove the usb from my mouse and keyboard
You didn't need to do that...

after getting some malware downloaded
You could've run malwarebytes to remove your malware.

You might want to clear the CMOS and see if that helps bring your system back up. If you still get no display, try powering off of the iGPU.