Hello, I would first like to start off by saying that all of the following have been tried.
Processor has been replaced
Power Supply Has been replaced
Ram has been replaced
Mobo has been replaced 3 times and bios flashed to the most recent version
Video Card has been replaced
All Dimm slots have been tested with 3 different ram.
End Product is the same on all motherboards, but seem to work fine at the warehouse.
Specs :
2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) (Elixir) "I hear elixir sucks"
1GB 240-Pin DDR2 SDRAM DDR2 667 (Kingston)
Processor : Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor
Mobo: BFG Tech BFG680i SLi LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard
Power Supply: BFG Tech BFGR650PSU 650W ATX 12v 2.0 / EPS 12V Power Supply 115/ 230 V UL, CE, FCC CLASS B
Video Card : EVGA 320-P2-N811-AR GeForce 8800 GTS 320MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card
Posting goes as follows
Turn on the computer with Processor, 1 stick ram, and video card.
post code C1 (Memory Presence / Base memory detect)
post code C3 (Extend Memory / Turn on extended memory, cache initialization)
and lastly
post code 18 (InitCPU / CPU ID and Initialize L1/L2 Cache) ** It gets hung here **
This is my first time ever to assemble a computer from scratch... it's been two months of going back and forth with intel / bfg... and BFG's Motherboard Specialist says he is stumped... any of you think you can figure it out?
THANKS A LOT!!!
Processor has been replaced
Power Supply Has been replaced
Ram has been replaced
Mobo has been replaced 3 times and bios flashed to the most recent version
Video Card has been replaced
All Dimm slots have been tested with 3 different ram.
End Product is the same on all motherboards, but seem to work fine at the warehouse.
Specs :
2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) (Elixir) "I hear elixir sucks"
1GB 240-Pin DDR2 SDRAM DDR2 667 (Kingston)
Processor : Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W Dual-Core Processor
Mobo: BFG Tech BFG680i SLi LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard
Power Supply: BFG Tech BFGR650PSU 650W ATX 12v 2.0 / EPS 12V Power Supply 115/ 230 V UL, CE, FCC CLASS B
Video Card : EVGA 320-P2-N811-AR GeForce 8800 GTS 320MB 320-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card
Posting goes as follows
Turn on the computer with Processor, 1 stick ram, and video card.
post code C1 (Memory Presence / Base memory detect)
post code C3 (Extend Memory / Turn on extended memory, cache initialization)
and lastly
post code 18 (InitCPU / CPU ID and Initialize L1/L2 Cache) ** It gets hung here **
This is my first time ever to assemble a computer from scratch... it's been two months of going back and forth with intel / bfg... and BFG's Motherboard Specialist says he is stumped... any of you think you can figure it out?
THANKS A LOT!!!