Build Advice NZXT Kraken 360 AIO not powering on but PC is booting to BIOS

[h3ro1212]

Hi all, I'm relatively new to pc building and I had just completed this new build using the kraken 360 cooler. The AIO itself doesn't seem to be powering on and the fans only budge a little but everything else in the pc works. I've attached a video to show what's happening. I've tried everything I could think of such as making sure everything is connected, reconnecting the cables, and flashing BIOS. Any advice would be appreciated.

Here are my specs:

Motherboard: MSI MAG B650 Tomahawk Wifi
CPU: AMD Ryzen 9 7900x
CPU Cooler: NZXT Kraken 360
RAM: Corsair Vengeance 32gb 2 x 16 DDR5-6000 CL30
Storage: Western Digital 2TB m.2-2280
GPU: Gigabyte WINDFORCE OC GeForce RTX 4070 SUPER 12 GB
Case: Fractal North ATX Mid Tower
PSU: Corsair RM850e (2023)
Case Fans: 3x Noctua NF-A12x25 PWM Chromax Black Swap

 

[Lutfij]

Welcome to the forums, newcomer!

Did you install the AIO as stated in the manual;
https://www.datocms-assets.com/34299/1681978891-cooling_kraken_digital-manual_v3_230221.pdf
Assuming this is your AIO;
https://nzxt.com/product/kraken-360?srsltid=AfmBOor5agxAzYCq5FsVLvT40r-l7AhiQJwRqRM-Z-YzaL69ji5Ps0-0
?

If so, have you checked to see that all cables are connected properly(while the PC's powered down)?

 

[h3ro1212]

Welcome to the forums, newcomer!

Did you install the AIO as stated in the manual;
https://www.datocms-assets.com/34299/1681978891-cooling_kraken_digital-manual_v3_230221.pdf
Assuming this is your AIO;
https://nzxt.com/product/kraken-360?srsltid=AfmBOor5agxAzYCq5FsVLvT40r-l7AhiQJwRqRM-Z-YzaL69ji5Ps0-0
?

If so, have you checked to see that all cables are connected properly(while the PC's powered down)?

Thank you for the welcome. Yes that is my AIO and I did follow the installation manual. I made sure and even reconnected the cables after powering down the pc. Same issue keeps appearing.

 

[h3ro1212]

Welcome to the forums, newcomer!

Did you install the AIO as stated in the manual;
https://www.datocms-assets.com/34299/1681978891-cooling_kraken_digital-manual_v3_230221.pdf
Assuming this is your AIO;
https://nzxt.com/product/kraken-360?srsltid=AfmBOor5agxAzYCq5FsVLvT40r-l7AhiQJwRqRM-Z-YzaL69ji5Ps0-0
?

If so, have you checked to see that all cables are connected properly(while the PC's powered down)?

Ok i just noticed the usb connector wasn't seated properly. After reseating everything is working fine. Sorry for disturbing.