Hello i just open my nitro 5 that is 4months old to put hdd and i see this,what is this? Somthing to worry? Pls help
https://ibb.co/LvtDKYt
https://ibb.co/LvtDKYt
i am just worry about warranty :/
Hey there,
That is a bit odd alright. Does it wipe off with a lint free cloth? It doesn't look as if there is any corrosion, so it should be alright.
Before you re-assemble, I'd take those fans out and give them a good clean. They look pretty grubby which won't help clearing the heat from the heatpipes.
Hey there,
That is a bit odd alright. Does it wipe off with a lint free cloth? It doesn't look as if there is any corrosion, so it should be alright.
Before you re-assemble, I'd take those fans out and give them a good clean. They look pretty grubby which won't help clearing the heat from the heatpipes.
no it dosent wipe off…
Have you tried isopropyl alcohol to remove it? If it didn't remove with that, then I'd leave it. Doesn't seem to be corrosive.
Sometimes you expect a little residue when re-pasting, but not where it is on yours. With that said, it's very possible that at manufacture, an operator may left the mark and not cleaned it.
If you're able to clean it up with iso, then I wouldn't worry too much. If you are very concerned , might be an idea to speak to Acer and see what they say.
ok thanks,i will ask acer myb,but laptop is brand new buyed 4months ago…so if you say no worry then ok thanks
Well, sure. I'm just giving my opinion. But it's good to talk to Aver too, to be sure.
ok i will,i post update when the responde…
But this is new laptop first time opened,just to add new HDD nothing else..
That's why I think you should contact them. It's still covered under warranty. So if they thought it was a series problem, they would replace the laptop for you.
Let us know what they say.
Happy gaming
ok thanks,will do when dey responde…
what dou you think of artic mx2 2019ed for laptop cpu/gpu?
TBH I haven't tried it. But, I've tried Arctic MX4/Coller Master Gel, and Noctua NT-H1. Of all of them, the Noctua has been the best performer for me (Omen 15 ) and that's for both CPU/GPU. MX4 was about 2-5c higher, and CM Gel was the worst, about 3-7 higher, which is weird because it has the highest conductivity rating for all 3.
Yeah, most anything is better than stock. MX2 will still reduce your temps if you re-paste.
i am just worry about warranty :/