Overclock my RAM

[sandeepb]

Hi everyone,

This forum is really live and I have got a lot of great info from it.

I was hoping if someone can point me in the right direction to overclock my RAM.

I have Kingston Value RAM @ 800Mhz - http://www.valueram.com/desktop/memory.asp

My clocks are as follows:

DRAM Freq: 401.8 Mhz
FSB😀RAM : 1:2
CAS Latency: 6 Clocks
RAS Precharge: 6 Clocks
Cycle Time: 18 Clocks
Bank Cycle Time: 25 Clocks
Command Rate: 2T

If you can tell me to change the values to get the most out of my RAM it would be great.

Thanks

 

[Maziar]

Check out the OC'ng guide in OC section,u will find useful infos there.

 

[m_silkstone]

Doubt you'll get much more out of it if it's rated at 6-6-6-25!
If you want to get it past 800mhz then it really needs to be rated at Cas4. I went thru loads of cas5 ram that wouldn't oc more than 50mhz. in the end i just bought some cas 5 1066mhz

 

[Maziar]

No,his timings arent 6-6-6-18,sometimes(I had this too)BIOS sets the timings of the RAMs to a number which isnt for them.u have to set them manually for example my RAM was set @ 5-5-5-9 in BIOS(original is 4-4-4-15) so i set them myself.