Overclocking an phenom II

Slayer32163

Distinguished
Mar 30, 2009
274
0
18,790
1
i have a phenom II x4 920
biostar 790gxb a2+


it has a automatic overclock setting and i use that because i am afraid of frying a board. but when i auto clock it sets my ram to 800 instead of 1066. it is currently at 3.2ghz and i need to know what to put in as hypertransport and voltage if i run at 250 speed.
 

yannifb

Distinguished
Jun 25, 2009
1,093
0
19,310
7


since a 955 (what i have) and a 920 are basically the same chip, save for the 920 being clocked lower, the voltages will be the same. The minimum voltage to run at 3.2ghz should be 1.1750, and that will also run very cool.
 

yannifb

Distinguished
Jun 25, 2009
1,093
0
19,310
7


1.35 volts (aka 955 stock voltage) can get to 3.5
 

brett1042002

Distinguished
Jun 17, 2009
565
0
19,010
12
I run at 3.6ghz @ 1.35v just fine. 18x multiplier @ 200mhz FSB. 32c idle... 43c full load.

I've even ran it at 3.8ghz for a while too, with 1.35v.... but most people recommend 1.375v at that frequency. I never ran into any issues though.
 

Slayer32163

Distinguished
Mar 30, 2009
274
0
18,790
1
i have tried everything to get this thing to run at a fsb of 250 and i cant. my motherboard wont go over 1.35v for cpu. can some one tell me EVERYTHING, Every single number or voltage, that i have to put in for a system to run stable.
 

Similar threads