Hi all,
i am OverClocking(OC) my t-bred-A-1800+ with stock multipliers. i get a stable OC at 162FSB (multiplier -11.5), 1864MHz, the equivalent of 2300+ ( almost). is there any way of opening the multipliers other than shorting the L1 bridges? i cannot find the conductive silver lacquer here :frown: . is there any other solution, any other alternative to the conductive silver lacquer?
BTW, i get this stable OC at V core = 1.7V. is this good? my idle temp is 46C on a Volcano 6Cu(this is the best HSF i could get here ) at 4000 rpm. i cud run the Volcano 6 at 5000 rpm and may be my idle temp would stay around 42-43C, but i dont like that much more noise. r these good enough, the temp and the Vcore values?
I use the A7V8X mobo. Also, in this mobo the BIOS gives me multiplier options ranging from 9 to around 20 (forgot the exact numbers). So, if i buy a t-bred-B-1700+ now, what is the max multiplier i can go upto? i don't want to increase my FSB beyond 162-163 (coz i use the DDR333 RAM).
in theory with the FSB at 162 and the multiplier set at 13 gives me 2106MHz, equivalent to that of a 2700+!!! and the multiplier at 13.5 gives me a 2800+ equivalent!!! is this a practical solution? also with the heat sink i have, the volcano 6, would the processor (the t-bred-B-1700+) survive such extreme OCing?
What is the best u guys have achieved with the t-bred-A-1800+?
i am OverClocking(OC) my t-bred-A-1800+ with stock multipliers. i get a stable OC at 162FSB (multiplier -11.5), 1864MHz, the equivalent of 2300+ ( almost). is there any way of opening the multipliers other than shorting the L1 bridges? i cannot find the conductive silver lacquer here :frown: . is there any other solution, any other alternative to the conductive silver lacquer?
BTW, i get this stable OC at V core = 1.7V. is this good? my idle temp is 46C on a Volcano 6Cu(this is the best HSF i could get here ) at 4000 rpm. i cud run the Volcano 6 at 5000 rpm and may be my idle temp would stay around 42-43C, but i dont like that much more noise. r these good enough, the temp and the Vcore values?
I use the A7V8X mobo. Also, in this mobo the BIOS gives me multiplier options ranging from 9 to around 20 (forgot the exact numbers). So, if i buy a t-bred-B-1700+ now, what is the max multiplier i can go upto? i don't want to increase my FSB beyond 162-163 (coz i use the DDR333 RAM).
in theory with the FSB at 162 and the multiplier set at 13 gives me 2106MHz, equivalent to that of a 2700+!!! and the multiplier at 13.5 gives me a 2800+ equivalent!!! is this a practical solution? also with the heat sink i have, the volcano 6, would the processor (the t-bred-B-1700+) survive such extreme OCing?
What is the best u guys have achieved with the t-bred-A-1800+?