Question Overwhelmed with case choices for new pc

GregP74

Distinguished
Jul 25, 2016
175
3
18,685
I've got another build coming up. I'll have an AMD 7800X3D cpu air cooled with either a Noctua D-15 or U-12a. I'll be using a full ATX (not EATX) motherboard, and a big 342mm (3 or 4 slot -- can't remember) sized GPU.

I'd like some recommendations for a high quality case. Not really worried about the cost as long as it's not outlandish. My last build used a Fractal North XL. It's nice but this new one is going to go on a desk rather than the floor and I think something a little shorter may be more appropriate.

I'm going to want something with good airflow. I know those cpus don't run too hot but I am kind of concerned about this 4000 series GPU. I'd kind of like something with bottom intakes so I could blow some air directly into it. I keep reading and watching these case reviews and they've got my head spinning. To be honest I'm probably over thinking things. The reviews are awful nit-picky and most of the negatives they talk about probably wouldn't affect me too much, but I don't want to make a bad decision.
 

Lutfij

Titan
Moderator
Lian-Li;
^
https://www.newegg.com/p/2AM-000Z-000D5
?
 
  • Like
Reactions: GregP74

GregP74

Distinguished
Jul 25, 2016
175
3
18,685
Lian-Li;
^
https://www.newegg.com/p/2AM-000Z-000D5
?
Thanks that Lancool 216 was one on my list to check out further. I'm kind of iffy on the O11 but it's nice looking too.
 

Zerk2012

Titan
Ambassador
Thanks that Lancool 216 was one on my list to check out further. I'm kind of iffy on the O11 but it's nice looking too.
I have the 216 great case. Buy the extra dust filter for the front.
 
  • Like
Reactions: GregP74
In the past, I had to find a case with a depth of 16" or less.
That is 406mm.
You will be hard pressed to find such a case today that will fit on your desk normally.
Probably the best one I can think of is the lian li air mini:
https://www.newegg.com/p/2AM-000Z-00080

It is 400mm deep.
The two front 140mm intakes should be able to supply sufficient airflow for the NH-D15 as well as a beefy graphics card.

What is the graphics card that you have in mind?
 
  • Like
Reactions: GregP74

GregP74

Distinguished
Jul 25, 2016
175
3
18,685
In the past, I had to find a case with a depth of 16" or less.
That is 406mm.
You will be hard pressed to find such a case today that will fit on your desk normally.
Probably the best one I can think of is the lian li air mini:
https://www.newegg.com/p/2AM-000Z-00080

It is 400mm deep.
The two front 140mm intakes should be able to supply sufficient airflow for the NH-D15 as well as a beefy graphics card.

What is the graphics card that you have in mind?
The graphics card that'll be going in there is a Gigabyte Aorus 4070 Master (I think that's the name) that's 342mm long.

As far as the air cooler goes I'm debating between the NH-D15 and the U-12A. (I've got both sitting around. The 12 may be a little easier to cram in there.)

Funny you mention the Air Mini. I was just looking at those as well. My idea for that was 140mm intakes on the front as well as 2 on the bottom, with 1x120mm exhaust on the back. (Nothing on the side.)
 

GregP74

Distinguished
Jul 25, 2016
175
3
18,685
To be honest, I've been building PCs for 35 years and I kind of miss some of those simple old cases from the 80s and 90s.

I don't need all those RGB things and would be totally fine with something that just had mesh or solid sides and no windows. I know there are plenty of SFF ones but I'm not so sure about one that would fit the hardware I need to cram in there.