I have just upgraded my system from Pentium 4 1.8 Ghz to Pentium 4 3.2Ghz 1mb Cache 800mhz FSB
Problem is Windows System Information shows processor as being rated at 2.8Ghz.
Also when checked with Si Soft Sandra it shows that it is recognized as a P4 3.2Ghz but states that processor speed is 2.8Ghz.
Have checked the bios where again it is recognized as P4 3.2 with 1mb Cache 800FSB but states that it's frequency is only 2.8Ghz.
Is this normal? or have I done something wrong in setup?.Is this CPU under performing for some reason?
Bios configuration is set to default.
I would be very grateful for any advice on this matter.
Sys. Specs:
Asus P4P800E Deluxe Mobo
Pentium P4 3.2Ghz 1mb Cache 800FSB
1Gb of Dual DDR 400 Ram (PC3200)
NVidia FX 5900 XT 128Mb Graphices Card
1x Maxtor 80Gb 7200 Hard Drive
1x IBM Deskstar 60GB Hard Drive
Windows XP Pro/Corporate O/S
Thanks
Rules are for the guidance of the wise and the obedience of fools.
Problem is Windows System Information shows processor as being rated at 2.8Ghz.
Also when checked with Si Soft Sandra it shows that it is recognized as a P4 3.2Ghz but states that processor speed is 2.8Ghz.
Have checked the bios where again it is recognized as P4 3.2 with 1mb Cache 800FSB but states that it's frequency is only 2.8Ghz.
Is this normal? or have I done something wrong in setup?.Is this CPU under performing for some reason?
Bios configuration is set to default.
I would be very grateful for any advice on this matter.
Sys. Specs:
Asus P4P800E Deluxe Mobo
Pentium P4 3.2Ghz 1mb Cache 800FSB
1Gb of Dual DDR 400 Ram (PC3200)
NVidia FX 5900 XT 128Mb Graphices Card
1x Maxtor 80Gb 7200 Hard Drive
1x IBM Deskstar 60GB Hard Drive
Windows XP Pro/Corporate O/S
Thanks
Rules are for the guidance of the wise and the obedience of fools.