Hi folks,
Today morning, my PC stopped working. It won't boot. There was no electric outage in my house the night before for my alarm'clock, which has no battery, has not been reset.
Background: I moved in a new house about a week ago, but I was very careful handling the PC when moving. It worked fine for 5/6 days.
WHAT HAPPENS:
I boot the PC, it boots for about one second and shuts down. The CPU, case and graphics card fans are winding up shortly and going off as well. 1 single, short beep... beeps.
On the motherboard, close to the 4 RAM memory racks, 4 LED lights, which are called "Phase LED", light up as follows:
DD1: green
DD2: green
DD3: orange
DD4: red
I have tried to move around of the ram memories in their racks, from 2x2, to 1x1, to 1x0 to 2x0 all to no avail...
Would anyone know how to interpret the lights signal and beep signal correctly?
Found this tread (http://www.tomshardware.co.uk/forum/291849-30-gigabyte-e7aum-ds2h-boot-phase-lights) which seems to be a similar issue, but I do not really know what to do.... I'm afraid I cannot test the voltage whatsoever.
My CFG:
MOTHERBOARD:
Gigabyte Z68AP-D3 (z68)
CPU:
Core I7 Quad 4/8 2600 3,4 Ghz
GRAPHICS:
PCI MSI nVidia GTX570 1280Mo
HARD DRIVES:
OS-drive: SSD Corsair Sata3 120 Go Force3
Storage Drive: SATA3 2 To Seagate 64Mo
CD/DVD:
LG GH22NS70 GrDVD 22x SATA Noir
Case:
Advance X11 no.alim
PSU:
LC-Power 500w PFC Active 12cm with Adaptator Molex-Sata
WIFI STICK: USB 150n TP-Link WiFi
OS: Windows 7 Premium x64 OEM
Thank you very much for your help...
Today morning, my PC stopped working. It won't boot. There was no electric outage in my house the night before for my alarm'clock, which has no battery, has not been reset.
Background: I moved in a new house about a week ago, but I was very careful handling the PC when moving. It worked fine for 5/6 days.
WHAT HAPPENS:
I boot the PC, it boots for about one second and shuts down. The CPU, case and graphics card fans are winding up shortly and going off as well. 1 single, short beep... beeps.
On the motherboard, close to the 4 RAM memory racks, 4 LED lights, which are called "Phase LED", light up as follows:
DD1: green
DD2: green
DD3: orange
DD4: red
I have tried to move around of the ram memories in their racks, from 2x2, to 1x1, to 1x0 to 2x0 all to no avail...
Would anyone know how to interpret the lights signal and beep signal correctly?
Found this tread (http://www.tomshardware.co.uk/forum/291849-30-gigabyte-e7aum-ds2h-boot-phase-lights) which seems to be a similar issue, but I do not really know what to do.... I'm afraid I cannot test the voltage whatsoever.
My CFG:
MOTHERBOARD:
Gigabyte Z68AP-D3 (z68)
CPU:
Core I7 Quad 4/8 2600 3,4 Ghz
GRAPHICS:
PCI MSI nVidia GTX570 1280Mo
HARD DRIVES:
OS-drive: SSD Corsair Sata3 120 Go Force3
Storage Drive: SATA3 2 To Seagate 64Mo
CD/DVD:
LG GH22NS70 GrDVD 22x SATA Noir
Case:
Advance X11 no.alim
PSU:
LC-Power 500w PFC Active 12cm with Adaptator Molex-Sata
WIFI STICK: USB 150n TP-Link WiFi
OS: Windows 7 Premium x64 OEM
Thank you very much for your help...