English is not my first langagues so sry if you dont understand something.
I built this pc for my mom with parts from my old pc, every time theres a power outage, when the power comes back you have to unplug it, then press the start button for 10 seconds to "purge the bad electricity from it", which i guess is necessary because the psu is not the best. Today my mom was working and suddenly the pc crashed with static noises and the display turned black, i guessed the problem was that it had frozen so i tried turning it off but after pressing the power button for 4 secs it did nothing so i shut it off from the PSU button, when i tried turning it on the fans would work (and the hdd too i think because it was vibrating a bit) but the display would remain black and a blue light in the front of the PC which normally turns on wouldnt.
After that i tried holding the power button and releasing it, i tried re seating the ram, i tried reseting the CMOS taking the battery and putting it back after 2 minutes, and I tried unplugging the peripherals and hdd and 1 stick of ram to see if it would work. Sadly it hasn't worked.
I hope someone can help me or i will have to take it to a tech
I built this pc for my mom with parts from my old pc, every time theres a power outage, when the power comes back you have to unplug it, then press the start button for 10 seconds to "purge the bad electricity from it", which i guess is necessary because the psu is not the best. Today my mom was working and suddenly the pc crashed with static noises and the display turned black, i guessed the problem was that it had frozen so i tried turning it off but after pressing the power button for 4 secs it did nothing so i shut it off from the PSU button, when i tried turning it on the fans would work (and the hdd too i think because it was vibrating a bit) but the display would remain black and a blue light in the front of the PC which normally turns on wouldnt.
After that i tried holding the power button and releasing it, i tried re seating the ram, i tried reseting the CMOS taking the battery and putting it back after 2 minutes, and I tried unplugging the peripherals and hdd and 1 stick of ram to see if it would work. Sadly it hasn't worked.
I hope someone can help me or i will have to take it to a tech
- Windows 10 Home 64 bit
- 970A-G43
- AMD fx 8320e 3.2GHz
- 2x8GB Hyperx fury RAM (1866MHz XMP profile 1)
- WD 1TB blue HDD
- Asus NVIDIA GeForce GT 710 1GB GDDR5
- sentey sdp 650-fx (650W 80 plus white)